F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Fitting a MICROTECH system to a 3T GTE??? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
oldcorollas Forums Junkie Location: Kita-Ku, Sapporo, Japan Registered: January 2003	Re: Fitting a MICROTECH system to a 3T GTE??? Sat, 01 November 2003 01:43 CAS = Cam angle sensor, not crank angle sensor.. if you run a crank angle sensor, you can only have wasted or dizzy. if you run cam angle sensor, you can have coil per plug. oxygen sensor 'does nothing' except when you are cruising and running in closed loop. a narrow band sensor can only detect stoich mixtures (it's basically an on/off switch), so when you are cruising/light load, the ECU should alter mxture so that the O2 sensor keeps switching. it will improve your cruising fuel economy, and it is useful in tuning the lower half of the table, but wideband is better (look for Tech Edge WB, about $500-600 if you assemble yourself) if you have a fitting in your exhaust manifold already, use that, and use any old sensor, if not weld a fitting to the point where the exhaust joins up, and run a heated sensor. i have some Bosch and NTK 4-wire, heated, narrow band sensors for $60 Cya, Stewart [Report message to a moderator]

	Subject	Poster	Date
	Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Thu, 30 October 2003 10:53
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Thu, 30 October 2003 11:42
	Re: Fitting a MICROTECH system to a 3T GTE???	Danish	Thu, 30 October 2003 16:31
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Thu, 30 October 2003 22:04
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 31 October 2003 11:52
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Sun, 02 November 2003 23:36
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Mon, 03 November 2003 02:04
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 02:15
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Mon, 03 November 2003 02:32
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 02:43
	Re: Fitting a MICROTECH system to a 3T GTE???	EMP-2TG	Fri, 31 October 2003 15:20
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:33
	Re: Fitting a MICROTECH system to a 3T GTE???	tanman	Fri, 31 October 2003 18:42
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 31 October 2003 21:16
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Sat, 01 November 2003 01:43
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:45
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Sat, 01 November 2003 01:53
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:56
	Re: Fitting a MICROTECH system to a 3T GTE???	thechuckster	Sat, 01 November 2003 02:18
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 02:32
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 01 November 2003 09:37
	Re: Fitting a MICROTECH system to a 3T GTE???	thechuckster	Sat, 01 November 2003 10:51
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Sat, 01 November 2003 14:26
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sun, 02 November 2003 11:20
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Sun, 02 November 2003 11:39
	Re: Fitting a MICROTECH system to a 3T GTE???	EMP-2TG	Sun, 02 November 2003 11:29
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Mon, 03 November 2003 10:52
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 21:54
	Re: Fitting a MICROTECH system to a 3T GTE???	thetoyman75	Tue, 04 November 2003 11:13
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Tue, 04 November 2003 21:09
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Tue, 04 November 2003 11:38
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Tue, 04 November 2003 11:43
	Re: Fitting a MICROTECH system to a 3T GTE???	thetoyman75	Wed, 05 November 2003 11:31
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Wed, 05 November 2003 21:32
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Wed, 05 November 2003 12:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Thu, 06 November 2003 11:44
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Thu, 06 November 2003 20:46
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 07 November 2003 07:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TE72_Turbo	Fri, 07 November 2003 13:08
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 08 November 2003 05:10
	Re: Fitting a MICROTECH system to a 3T GTE???	TE72_Turbo	Sat, 08 November 2003 07:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 08 November 2003 12:53

Previous Topic:	My car is wacked
Next Topic:	engine crane to borrow today? (saturday)

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.