F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Fitting a MICROTECH system to a 3T GTE??? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
oldcorollas Forums Junkie Location: Kita-Ku, Sapporo, Japan Registered: January 2003	Re: Fitting a MICROTECH system to a 3T GTE??? Sat, 01 November 2003 01:53 well, that depends on what they are used for... as i understand it, a crank angle sensor can be used to give RPM, and also TDC, but doesn't know which half of the engine cycle is happening (ie on a 4cyl, either 1 or 4) a cam angle sensor can give you both RPM and actual engine cycle position. since it is liek a dizzy in it's position info, it will know if cyl1 or cyl4 is at TDC, so you can have coil per plug. it will also give you RPM, but that's a little trickier. this is cos if you have 1 tooth per cylinder on the CamAS, then you have 4 pulses per cycle, or 2 pulse per rpm, so you need to divide it. usually tho, no1 TDC will have two close teeth, so there are maybe 5 teeth per engine cycle.. obviously this requires a bit of computing setup as you can't just run at and expect it to work... i would guess that your crank sensor is for rpm, and the cam sensor is for firing wasted spark??? i'd love to have a look in a couple of months Cya, Stewart [Report message to a moderator]

	Subject	Poster	Date
	Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Thu, 30 October 2003 10:53
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Thu, 30 October 2003 11:42
	Re: Fitting a MICROTECH system to a 3T GTE???	Danish	Thu, 30 October 2003 16:31
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Thu, 30 October 2003 22:04
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 31 October 2003 11:52
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Sun, 02 November 2003 23:36
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Mon, 03 November 2003 02:04
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 02:15
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Mon, 03 November 2003 02:32
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 02:43
	Re: Fitting a MICROTECH system to a 3T GTE???	EMP-2TG	Fri, 31 October 2003 15:20
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:33
	Re: Fitting a MICROTECH system to a 3T GTE???	tanman	Fri, 31 October 2003 18:42
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 31 October 2003 21:16
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Sat, 01 November 2003 01:43
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:45
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Sat, 01 November 2003 01:53
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:56
	Re: Fitting a MICROTECH system to a 3T GTE???	thechuckster	Sat, 01 November 2003 02:18
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 02:32
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 01 November 2003 09:37
	Re: Fitting a MICROTECH system to a 3T GTE???	thechuckster	Sat, 01 November 2003 10:51
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Sat, 01 November 2003 14:26
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sun, 02 November 2003 11:20
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Sun, 02 November 2003 11:39
	Re: Fitting a MICROTECH system to a 3T GTE???	EMP-2TG	Sun, 02 November 2003 11:29
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Mon, 03 November 2003 10:52
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 21:54
	Re: Fitting a MICROTECH system to a 3T GTE???	thetoyman75	Tue, 04 November 2003 11:13
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Tue, 04 November 2003 21:09
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Tue, 04 November 2003 11:38
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Tue, 04 November 2003 11:43
	Re: Fitting a MICROTECH system to a 3T GTE???	thetoyman75	Wed, 05 November 2003 11:31
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Wed, 05 November 2003 21:32
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Wed, 05 November 2003 12:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Thu, 06 November 2003 11:44
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Thu, 06 November 2003 20:46
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 07 November 2003 07:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TE72_Turbo	Fri, 07 November 2003 13:08
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 08 November 2003 05:10
	Re: Fitting a MICROTECH system to a 3T GTE???	TE72_Turbo	Sat, 08 November 2003 07:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 08 November 2003 12:53

Previous Topic:	My car is wacked
Next Topic:	engine crane to borrow today? (saturday)

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.