F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Fitting a MICROTECH system to a 3T GTE??? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
TA22 GT Regular Registered: November 2002	Re: Fitting a MICROTECH system to a 3T GTE??? Sun, 02 November 2003 11:20 I took the dizzy cap off today and found that there is only 4 pick ups for spark. I assume its the same for all old 4 bangers? Unless I'm looking in the wrong spot? The stock 3T GTE has twin spark but from what I see, both plugs fire at the same time? I assume from this that I will need to use a crank angle sensor so the ECU can change timing under boost etc? I think I will do the following- Install either a Microtech LT or LTX8 Fit an oxygen sensor at the back of the turbo housing (most likely a 4 wire from a Holden or late Toyota) Fit a air temp sensor at the plenum inlet (maybe from a late Toyota) Re-use the existing twin coils and dizzy. Fit a crank angle sensor? Unless someone can tell me for sure I can use the pick up from my existing dizzy. Any other tips? Simon [Report message to a moderator]

	Subject	Poster	Date
	Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Thu, 30 October 2003 10:53
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Thu, 30 October 2003 11:42
	Re: Fitting a MICROTECH system to a 3T GTE???	Danish	Thu, 30 October 2003 16:31
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Thu, 30 October 2003 22:04
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 31 October 2003 11:52
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Sun, 02 November 2003 23:36
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Mon, 03 November 2003 02:04
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 02:15
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Mon, 03 November 2003 02:32
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 02:43
	Re: Fitting a MICROTECH system to a 3T GTE???	EMP-2TG	Fri, 31 October 2003 15:20
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:33
	Re: Fitting a MICROTECH system to a 3T GTE???	tanman	Fri, 31 October 2003 18:42
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 31 October 2003 21:16
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Sat, 01 November 2003 01:43
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:45
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Sat, 01 November 2003 01:53
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:56
	Re: Fitting a MICROTECH system to a 3T GTE???	thechuckster	Sat, 01 November 2003 02:18
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 02:32
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 01 November 2003 09:37
	Re: Fitting a MICROTECH system to a 3T GTE???	thechuckster	Sat, 01 November 2003 10:51
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Sat, 01 November 2003 14:26
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sun, 02 November 2003 11:20
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Sun, 02 November 2003 11:39
	Re: Fitting a MICROTECH system to a 3T GTE???	EMP-2TG	Sun, 02 November 2003 11:29
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Mon, 03 November 2003 10:52
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 21:54
	Re: Fitting a MICROTECH system to a 3T GTE???	thetoyman75	Tue, 04 November 2003 11:13
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Tue, 04 November 2003 21:09
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Tue, 04 November 2003 11:38
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Tue, 04 November 2003 11:43
	Re: Fitting a MICROTECH system to a 3T GTE???	thetoyman75	Wed, 05 November 2003 11:31
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Wed, 05 November 2003 21:32
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Wed, 05 November 2003 12:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Thu, 06 November 2003 11:44
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Thu, 06 November 2003 20:46
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 07 November 2003 07:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TE72_Turbo	Fri, 07 November 2003 13:08
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 08 November 2003 05:10
	Re: Fitting a MICROTECH system to a 3T GTE???	TE72_Turbo	Sat, 08 November 2003 07:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 08 November 2003 12:53

Previous Topic:	My car is wacked
Next Topic:	engine crane to borrow today? (saturday)

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.