F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Distributor Vacuum Advance Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Jonny2TG Forums Junkie Location: Tasmania Registered: May 2002	Re: Distributor Vacuum Advance Sat, 27 July 2002 08:42 I had the same problem. I used a good diaphram off a 18R-C or 4K distributor, and if it wasn't quite right I machined some part off it on the lathe, and cut and filed other bits to suit. It works, but I'm not sure how much it advances with the low vacume off one cylinder. I will go and see now. [Report message to a moderator]

	Subject	Poster	Date
	Distributor Vacuum Advance	GIN51E	Fri, 26 July 2002 11:37
	Re: Distributor Vacuum Advance	Cool1	Fri, 26 July 2002 12:28
	Re: Distributor Vacuum Advance	GIN51E	Fri, 26 July 2002 12:53
	Re: Distributor Vacuum Advance	Jonny2TG	Fri, 26 July 2002 14:38
	Re: Distributor Vacuum Advance	5KinKP60	Fri, 26 July 2002 16:46
	Re: Distributor Vacuum Advance	Jonny2TG	Fri, 26 July 2002 17:40
	Re: Distributor Vacuum Advance	5KinKP60	Fri, 26 July 2002 19:29
	Re: Distributor Vacuum Advance	poida	Sat, 27 July 2002 05:29
	Re: Distributor Vacuum Advance	Jonny2TG	Sat, 27 July 2002 08:42
	Re: Distributor Vacuum Advance	Classique71	Sat, 27 July 2002 08:57

Previous Topic:	Wanted Custom Dizzy Builders in Sydney
Next Topic:	roll cages

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.