| Author | Topic |
|---|
Location:
Adelaide
Registered:
May 2002
|
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
Tue, 04 November 2003 08:32
 
|
 |
Ok then, coming from my angle (I need to change a set of cortina Hubs from 4x108 to 4x114.3). A stud pattern change is as simple as this.
Press out the original studs and weld up the original holes. Then take the freshly blanked hubs to a machine shop or anyone with a precision drill press and have them drilled to my desired PCD. Then re-press wheel studs and smile.
|
|
|
| | Subject | Poster | Date |
|---|
 |
stud change paten from 5 / 100 to 5 / 114.3
|
toy.car | Sat, 23 August 2003 10:12 |
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
celicafan | Sun, 02 November 2003 07:11 |
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
celicafan | Sun, 02 November 2003 12:01 |
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
mrshin | Sun, 02 November 2003 22:46 |
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
ed_ma61 | Sun, 02 November 2003 23:07 |
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
wagonist | Mon, 03 November 2003 02:52 |
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
LBack | Mon, 03 November 2003 07:00 |
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
celicafan | Mon, 03 November 2003 08:42 |
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
Rex_Kelway | Tue, 04 November 2003 08:32 |
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
ed_ma61 | Tue, 04 November 2003 10:29 |
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
Bugman | Tue, 04 November 2003 10:36 |
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
spectral | Tue, 04 November 2003 23:28 |
|
Re: stud change paten from 5 / 100 to 5 / 114.3
|
celicafan | Sun, 09 November 2003 14:18 |
