you would have to make up custom brakets to fit the s/c under your inlet manifold, as it needs to be at the least 3" lower to fit under a ge inlet manifold.
or you could mount it on the exhaust side. (i dont know if you have a/c or not).
there is also sorting out your pulley/s system to run it, plus pipe work, i/c etc.
Tue, 04 November 2003 08:58
you would have to make up custom brakets to fit the s/c under your inlet manifold, as it needs to be at the least 3" lower to fit under a ge inlet manifold.
