F.A.Q.    Register    Login    Home Members    Search

Classifieds » Miscellaneous » FS: Mircotech MT8 Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
TX3Turbo Occasional Poster Location: Sydney Registered: February 2003	Re: FS: Mircotech MT8 Wed, 05 November 2003 05:08 7mgtema71 wrote on Wed, 05 November 2003 15:49 I didn't see a hand controller in the shopping list. Do you have one or did you have it tuned with a laptop??? Some other enquires... How old is the unit? I would assume the loom is cut to suit the Mazda 1.6ltr Turbo? Are you providing any sensors with your package? And when you say regulator, i'm asuming a fuel reg, right? Thanks No it doesn't have a controller. I guess you can use the software on the laptop to tune it. Im not sure I haven't tuned it myself. I got the car with this computer, and after installing the stock computer (which i prefer over aftermarket ones, persional choice) i decided to sell this unit. Not sure how old the unit is. I can post some pictures if that can help. Its black in color and has Mictotech MT8 writing on it along with sequential injection next it. The wiring loom has been carfully removed from the mazda engine so there is fair bit of wires left on the loom. This computer has inbuilt MAP sensor so you dont need to use any external sensors thats why there are non to include. It was working with the standard dizzy that came on the mazda engine so i guess it can be adopted to any dizzy. The regulator is i think the power regulator... I'll double check but from the memory it had regulator written on it and its a small plastic device. HTH [Report message to a moderator]

	Subject	Poster	Date
	FS: Mircotech MT8	TX3Turbo	Mon, 03 November 2003 00:49
	Re: FS: Mircotech MT8	EMP-2TG	Mon, 03 November 2003 01:03
	Re: FS: Mircotech MT8	TX3Turbo	Mon, 03 November 2003 02:00
	Re: FS: Mircotech MT8	spoon_god	Mon, 03 November 2003 02:01
	Re: FS: Mircotech MT8	TX3Turbo	Mon, 03 November 2003 02:46
	Re: FS: Mircotech MT8	pepsicola	Mon, 03 November 2003 05:55
	Re: FS: Mircotech MT8	juzzo84	Mon, 03 November 2003 06:10
	Re: FS: Mircotech MT8	TX3Turbo	Mon, 03 November 2003 22:46
	Re: FS: Mircotech MT8	TX3Turbo	Wed, 05 November 2003 02:36
	Re: FS: Mircotech MT8	Ko Ko	Wed, 05 November 2003 03:04
	Re: FS: Mircotech MT8	TX3Turbo	Wed, 05 November 2003 03:12
	Re: FS: Mircotech MT8	7mgtema71	Wed, 05 November 2003 04:49
	Re: FS: Mircotech MT8	TX3Turbo	Wed, 05 November 2003 05:08
	Re: FS: Mircotech MT8	TX3Turbo	Sat, 08 November 2003 07:13

Previous Topic:	FS: Nissan RB20DET Motor, ecu, loom
Next Topic:	16 inch JZA80 Supra Wheels

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.