| Author | Topic |
|---|
Location:
Brisbane
Registered:
October 2002
|
|
Re: 18rgeu questions and lots of them
|
Wed, 05 November 2003 11:28
 
|
 |
head gaskets are all the same
use a sc14 from a 1GGZE
depends on what the problem was, if it was just a blown headgasket then it may have over heated and warped or cracked 
u can pull it off and use a straight enge and a set of very thin feeler guages and check for true-ness.
it may have only cracked slightly up inside one of the ports or galleries, so it may pay to have a full pressure test done, they cant crack test a alloy head as they dont conduct very well.
but they can do a sonic test
call JHH engineering in woodridge
or Bryants engineering at coopers plains
or redlands engines
|
|
|
