F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » ST162 pod filter Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
RobST162 Forums Junkie Location: Epping, Sydney Registered: April 2003	Re: ST162 pod filter Thu, 06 November 2003 04:47 ok. I got 90mm PVC pipe, after I felt the flexy stuff I had was too restrictive to the air flow. I got plumbers glue, a hacksaw, some little "L" brackts and a face plate from like a rangehood ducting system or somthing, all from Hardware House. See the piccies here. It will soon be fiberglassed to my air box with my K & N panel if I don't think of a way of sealing the pod area. Just ignore the remaining flexy silver stuff there. That does nothing, I just haven't taken it off yet. Also a dremel drill really helps with the airbox (if you are still using it). I secured it on the bottom just using the bracket with the glue joining all the PVC components with the exception of one of the top ones so I can remove it when required (like for pink slip) . The whole pipe will be fibreglassed and painted soon too. Also there is small hole for any water that somehow may get trapped in there. You get more dirt on your filter though with these... Edit: bad link. you better love me now [Updated on: Thu, 06 November 2003 04:48] [Report message to a moderator]

	Subject	Poster	Date
	ST162 pod filter	pepsicola	Wed, 05 November 2003 03:02
	Re: ST162 pod filter	crazy_camry	Wed, 05 November 2003 03:06
	Re: ST162 pod filter	Skinnypoo	Thu, 06 November 2003 04:12
	Re: ST162 pod filter	RobST162	Thu, 06 November 2003 04:23
	Re: ST162 pod filter	Skinnypoo	Thu, 06 November 2003 04:25
	Re: ST162 pod filter	RobST162	Thu, 06 November 2003 04:30
	Re: ST162 pod filter	Skinnypoo	Thu, 06 November 2003 04:32
	Re: ST162 pod filter	RobST162	Thu, 06 November 2003 04:47

Previous Topic:	Sprinter with 7" rims and a +25mm offset
Next Topic:	looking for right hand driver parts

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.