F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Fitting a MICROTECH system to a 3T GTE??? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
TE72_Turbo Forums Junkie Location: Canberra Registered: May 2002	Re: Fitting a MICROTECH system to a 3T GTE??? Fri, 07 November 2003 13:08 Quote: Does the microtech shut off the fuel pump when it senses no air flow to the engine? Eg like the standard AFM does as a safety feature. Yes. The microtech will prime the pump when you turn the ignition on. If you leave the ignition on without cranking the motor, the pump will stop running after a set time (30 seconds?). When you start cranking the motor, the computer will see this as an RPM reading from the ignition input signal from your dizzy, and start the fuel pump again. If your motor stops running without you turning the ignition off (like in a crash), the Microtech will shut down the fuel pump as soon as it stops seeing the ignition input signal. Quote: Can I use the LTX8 and still use my existing coils and igniters like I would with the LT8? I do want to run standard coils etc but I'm thinking that buying an LTX8 will give me the flexbility to get rid of the dizzy if I want to at a later date. The difference between LT8 and LTX8 is that the "X" models have an internal ignitor module within the ECU, negating the need for you to run the factory one. I am not sure if the LTX is compatible with the dual spark setup on the 3TGTE, again, speak to microtech to see if you need to use the factory ign module with an LT8 only. Did microtech mention locking the mechanical advance mechanism in the base of the dizzy when you spoke to them? Cheers Phil [Report message to a moderator]

	Subject	Poster	Date
	Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Thu, 30 October 2003 10:53
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Thu, 30 October 2003 11:42
	Re: Fitting a MICROTECH system to a 3T GTE???	Danish	Thu, 30 October 2003 16:31
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Thu, 30 October 2003 22:04
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 31 October 2003 11:52
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Sun, 02 November 2003 23:36
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Mon, 03 November 2003 02:04
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 02:15
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Mon, 03 November 2003 02:32
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 02:43
	Re: Fitting a MICROTECH system to a 3T GTE???	EMP-2TG	Fri, 31 October 2003 15:20
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:33
	Re: Fitting a MICROTECH system to a 3T GTE???	tanman	Fri, 31 October 2003 18:42
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 31 October 2003 21:16
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Sat, 01 November 2003 01:43
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:45
	Re: Fitting a MICROTECH system to a 3T GTE???	oldcorollas	Sat, 01 November 2003 01:53
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 01:56
	Re: Fitting a MICROTECH system to a 3T GTE???	thechuckster	Sat, 01 November 2003 02:18
	Re: Fitting a MICROTECH system to a 3T GTE???	draven	Sat, 01 November 2003 02:32
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 01 November 2003 09:37
	Re: Fitting a MICROTECH system to a 3T GTE???	thechuckster	Sat, 01 November 2003 10:51
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Sat, 01 November 2003 14:26
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sun, 02 November 2003 11:20
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Sun, 02 November 2003 11:39
	Re: Fitting a MICROTECH system to a 3T GTE???	EMP-2TG	Sun, 02 November 2003 11:29
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Mon, 03 November 2003 10:52
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Mon, 03 November 2003 21:54
	Re: Fitting a MICROTECH system to a 3T GTE???	thetoyman75	Tue, 04 November 2003 11:13
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Tue, 04 November 2003 21:09
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Tue, 04 November 2003 11:38
	Re: Fitting a MICROTECH system to a 3T GTE???	sideshow	Tue, 04 November 2003 11:43
	Re: Fitting a MICROTECH system to a 3T GTE???	thetoyman75	Wed, 05 November 2003 11:31
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Wed, 05 November 2003 21:32
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Wed, 05 November 2003 12:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Thu, 06 November 2003 11:44
	Re: Fitting a MICROTECH system to a 3T GTE???	10sec_rx7	Thu, 06 November 2003 20:46
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Fri, 07 November 2003 07:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TE72_Turbo	Fri, 07 November 2003 13:08
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 08 November 2003 05:10
	Re: Fitting a MICROTECH system to a 3T GTE???	TE72_Turbo	Sat, 08 November 2003 07:00
	Re: Fitting a MICROTECH system to a 3T GTE???	TA22 GT	Sat, 08 November 2003 12:53

Previous Topic:	My car is wacked
Next Topic:	engine crane to borrow today? (saturday)

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.