F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » what next for the 7mgte? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
SUPRAGTE Forums Junkie Location: North Sydney Registered: May 2002	Re: what next for the 7mgte? Mon, 10 November 2003 09:11 If it was mine id -be changing the computer first because the tuning figures in it are the reason the head gasket blows not because of the head gasket. The detonation from far too advanced timing is the reason. You'll get alot more benefit from that then doing internals. Internals are one of the last things to do. - You cant change the injectors, sensor and intake(removing the AFM) without changing the computer or re tuning it so might as well change the ECU and that will fix alot and alow more power to be developed. - I would go Microtech, alot of others would agree on here its perfect. I wired up mine in about 5 hours, turn the key and drive [Report message to a moderator]

	Subject	Poster	Date
	what next for the 7mgte?	thug_immortal	Mon, 10 November 2003 08:06
	Re: what next for the 7mgte?	SUPRAGTE	Mon, 10 November 2003 09:11
	Re: what next for the 7mgte?	thug_immortal	Mon, 10 November 2003 09:22
	Re: what next for the 7mgte?	draven	Mon, 10 November 2003 09:23
	Re: what next for the 7mgte?	Allan	Mon, 10 November 2003 12:54
	Re: what next for the 7mgte?	Norbie	Mon, 10 November 2003 23:29
	Re: what next for the 7mgte?	SUPRAGTE	Tue, 11 November 2003 04:19
	Re: what next for the 7mgte?	lumpy	Tue, 11 November 2003 05:29
	Re: what next for the 7mgte?	thug_immortal	Tue, 11 November 2003 05:30
	Re: what next for the 7mgte?	lumpy	Tue, 11 November 2003 05:34
	Re: what next for the 7mgte?	thug_immortal	Tue, 11 November 2003 05:40
	Re: what next for the 7mgte?	lumpy	Tue, 11 November 2003 05:46
	Re: what next for the 7mgte?	bbaacchhyy	Tue, 11 November 2003 21:06

Previous Topic:	Next project...
Next Topic:	W58 Front Shaft Bearing - Needle Roller instead of Ball Bearing

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.