F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Extremly high pressure in the 18R-C Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ra23celicachick Forums Junkie Location: Mornington Peninsula Registered: September 2002	Re: Extremly high pressure in the 18R-C Wed, 19 November 2003 21:35 I know the one at the front of the rocker cover that feeds strait into the air filter isn't blocked because that's been pushing oil up into there. I'll have a check of the one that feeds into the carby. Basically, what's happened is I had a pre polution engine in there (block, head, inlet) we took all that out of the car (because it was using more oil than petrol) and put a polution engine in but put the pre polution inlet back on. The head cracked on the polution head so we took that off and put the pre polution head on there that we originally took out. We never had these problems with this head and inlet on the old block, it's only the new block. Is there something not compatable with the polution and pre polution engines. Also this is why I tend to think that the problem is in the block. If it was a cracked piston or the piston rings would the car be going through a lot of oil?? It's not blowing any smoke and the only oil it looses is the bit out of the oil cap. I'm going to take the car on a long drive this weekend and hopefully the long trip will help it settle down. Thanks for everyones help and input [Report message to a moderator]

	Subject	Poster	Date
	Extremly high pressure in the 18R-C	ra23celicachick	Wed, 12 November 2003 22:03
	Re: Extremly high pressure in the 18R-C	Allan	Wed, 12 November 2003 22:55
	Re: Extremly high pressure in the 18R-C	Jason	Wed, 12 November 2003 23:07
	Re: Extremly high pressure in the 18R-C	ra23celicachick	Wed, 12 November 2003 23:15
	Re: Extremly high pressure in the 18R-C	Byatch	Thu, 13 November 2003 04:47
	Re: Extremly high pressure in the 18R-C	Jason	Thu, 13 November 2003 04:57
	Re: Extremly high pressure in the 18R-C	Byatch	Thu, 13 November 2003 05:47
	Re: Extremly high pressure in the 18R-C	Steve M	Fri, 14 November 2003 00:30
	Re: Extremly high pressure in the 18R-C	hemi twofifteen turbo	Sat, 15 November 2003 01:21
	Re: Extremly high pressure in the 18R-C	Mr DOHC	Sat, 15 November 2003 08:17
	Re: Extremly high pressure in the 18R-C	ra23celicachick	Sun, 16 November 2003 21:31
	Re: Extremly high pressure in the 18R-C	Allan	Mon, 17 November 2003 00:08
	Re: Extremly high pressure in the 18R-C	Mr DOHC	Mon, 17 November 2003 11:20
	Re: Extremly high pressure in the 18R-C	ra23celicachick	Mon, 17 November 2003 21:18
	Re: Extremly high pressure in the 18R-C	Mr DOHC	Tue, 18 November 2003 10:36
	Re: Extremly high pressure in the 18R-C	turbocamry	Tue, 18 November 2003 11:20
	Re: Extremly high pressure in the 18R-C	ra23celicachick	Wed, 19 November 2003 03:29
	Re: Extremly high pressure in the 18R-C	thechuckster	Wed, 19 November 2003 09:23
	Re: Extremly high pressure in the 18R-C	Mr DOHC	Wed, 19 November 2003 09:57
	Re: Extremly high pressure in the 18R-C	ra23celicachick	Wed, 19 November 2003 21:35

Previous Topic:	DIY TIG welder
Next Topic:	3sge cam specs needed

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.