| Author | Topic |
|---|
Location:
Sydney
Registered:
October 2003
|
|
Re: WTB: driverside window switch AW11 mr2
|
Wed, 26 November 2003 07:54
 
|
 |
Don't know if you've seen this before.
http://www.deru.com/~sgn1/AW11/Bodyre.htm
Sometimes the power windows will not work because the switch is just full of crud, and a good cleaning will fix the problem. Another problem is when the small center switch becomes wallowed out and will not make contact. A cheap fix for this is to take out the switch and carefully cut off the bump stop for the larger button and make the larger button work both up and down. Also, a non working window could also be from a snapped regulator cable.
And for the plastic Cog replacement http://www.twosrus.com/new/Lower_Frames/Products/F abricated/MKIwindowgear.htm might be cheaper than buyer a whole assembly.
|
|
|
