| Author | Topic |
|---|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: How to fit a fender?
|
Sat, 29 November 2003 15:35
 
|
 |
Start from the rear of the door, making the door gap equal down the meeting face, then tighten the door bolts. Next loose fit the fender, or loosen so you can adjust it back and forth. Again make sure the gap is equal along the meeting face, and also make sure the door doesn't catch the trailing edge of the fender.
If the fender is bent along that edge, you'll have to panel beat it back into alignment, the joy of an AE86 is you can usually do this with your hands to some extent. Once it clears the door comfortably, start to tighten the mounting bolts, checking the bonnet meeting face as you go also for equal gap!
|
|
|
| | Subject | Poster | Date |
|---|
 |
How to fit a fender?
|
fOOZ86 | Sat, 29 November 2003 12:50 |
|
Re: How to fit a fender?
|
jackel | Sat, 29 November 2003 12:54 |
|
Re: How to fit a fender?
|
fOOZ86 | Sat, 29 November 2003 13:00 |
|
Re: How to fit a fender?
|
CLG | Sat, 29 November 2003 15:35 |
|
Re: How to fit a fender?
|
fOOZ86 | Sat, 29 November 2003 16:52 |
