Can u work it out from a simple circuit I use to get mine working?
I have been using this circuit for about 6 years with no problems and an accurate tacho
Hopefully this piece of ASCII art will work!?
This is to convert the signal from an AE101 MAP/DLI 4AGZE to a standard AE86 dash cluster (either Aus or JDM). I believe the same circuit can be used with the AE82 and AE92 but I havent tried it.
[From Igniter]----||----T----->[Tacho]
1uf |
cap 10k resistor
|
V
Ign+
Sun, 30 November 2003 08:30
