Author | Topic |
Location: Adelaide, SA
Registered: May 2002
|
Re: Wobbly crankpulley, what to do?
|
Tue, 02 December 2003 22:29
|
|
It's not physically that hard, as if you get a jza-70 front cut you can just bolt it all in, and then wiring it up for me took a while, but now there are ALL the pinouts/wiring diagrams on the net so it's not so bad. We took a bit of time and care with mine to make it all work schmick, and used quite few new bits like engine mounts, shockers, suspension bushes etc etc. All up it cost me around $6000 - doing the work myself (and it was manual front cut).
The 1j is a good motor, but the age of the jza-70's means they've usually done quite a few km's and the turbos are on their way out. Remeber they are a twin turbo, and not cheap to get rebuilt (twice the cost) and also not very good for bigger power applications - then going single turbo is expensive too.
If I were you, I'd get another 7m-gte, do the head studs, metal HG, new bearings, forged pistons (if you can afford them), and a high-flowed CT-26, 3in exhaust etc to start with. It would be a cheaper/less hassle way than 1jz.
|
|
|
| Subject | Poster | Date |
|
Wobbly crankpulley, what to do?
|
dingaling | Thu, 27 November 2003 14:03 |
|
Re: Wobbly crankpulley, what to do?
|
CrUZsida | Thu, 27 November 2003 16:01 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Thu, 27 November 2003 23:54 |
|
Re: Wobbly crankpulley, what to do?
|
Bugman | Fri, 28 November 2003 00:19 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Fri, 28 November 2003 00:22 |
|
Re: Wobbly crankpulley, what to do?
|
CrUZsida | Fri, 28 November 2003 00:31 |
|
Re: Wobbly crankpulley, what to do?
|
ed_ma61 | Fri, 28 November 2003 01:34 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Fri, 28 November 2003 02:20 |
|
Re: Wobbly crankpulley, what to do?
|
CrUZsida | Fri, 28 November 2003 02:24 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Fri, 28 November 2003 02:33 |
|
Re: Wobbly crankpulley, what to do?
|
CrUZsida | Fri, 28 November 2003 02:38 |
|
Re: Wobbly crankpulley, what to do?
|
lumpy | Fri, 28 November 2003 03:06 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Sat, 29 November 2003 13:48 |
|
Re: Wobbly crankpulley, what to do?
|
lumpy | Sun, 30 November 2003 00:52 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Sun, 30 November 2003 08:53 |
|
Re: Wobbly crankpulley, what to do?
|
ed_ma61 | Sun, 30 November 2003 12:20 |
|
Re: Wobbly crankpulley, what to do?
|
Allan | Sun, 30 November 2003 12:53 |
|
Re: Wobbly crankpulley, what to do?
|
ed_ma61 | Sun, 30 November 2003 13:17 |
|
Re: Wobbly crankpulley, what to do?
|
BlackSupra | Sun, 30 November 2003 12:40 |
|
Re: Wobbly crankpulley, what to do?
|
thechuckster | Sun, 30 November 2003 13:40 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Mon, 01 December 2003 05:56 |
|
Re: Wobbly crankpulley, what to do?
|
lumpy | Mon, 01 December 2003 06:24 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Mon, 01 December 2003 06:45 |
|
Re: Wobbly crankpulley, what to do?
|
BlackSupra | Mon, 01 December 2003 07:06 |
|
Re: Wobbly crankpulley, what to do?
|
CrUZsida | Mon, 01 December 2003 07:33 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Mon, 01 December 2003 07:48 |
|
Re: Wobbly crankpulley, what to do?
|
BlackSupra | Mon, 01 December 2003 08:25 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Mon, 01 December 2003 09:41 |
|
Re: Wobbly crankpulley, what to do?
|
BigWorm | Mon, 01 December 2003 10:17 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Mon, 01 December 2003 11:59 |
|
Re: Wobbly crankpulley, what to do?
|
Allan | Mon, 01 December 2003 12:41 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Mon, 01 December 2003 12:57 |
|
Re: Wobbly crankpulley, what to do?
|
lumpy | Mon, 01 December 2003 22:11 |
|
Re: Wobbly crankpulley, what to do?
|
dingaling | Tue, 02 December 2003 14:09 |
|
Re: Wobbly crankpulley, what to do?
|
lumpy | Tue, 02 December 2003 22:29 |
|
Re: Wobbly crankpulley, what to do?
|
Allan | Tue, 02 December 2003 23:49 |
|
Re: Wobbly crankpulley, what to do?
|
lumpy | Wed, 03 December 2003 00:36 |
|
Re: Wobbly crankpulley, what to do?
|
Allan | Wed, 03 December 2003 00:58 |
Current Time:
Fri Jan 10 23:44:28 UTC 2025 |
Total time taken to generate the page: 0.010586977005005 seconds |