| Author | Topic |
|---|
Location:
Adelaide
Registered:
July 2002
|
|
Re: Help with 4ac PLEASE!!
|
Thu, 01 August 2002 12:34
 
|
 |
Hey Justin
yeh im pretty sure all the hoses are back where they are supposed to be, as for the ones on the EGR i just took all the lines from the vacuum rail thing goin to the egr and the egr modulator off and they're just kinda suckin in fresh air?? not a good idea?? also i have a 9' chromie air cleaner on there with the breather hose goin into it, the pcv valve is just venting into the engine bay with the plastic regulator valve thingy, sorry i dont know the proper names of everything yet, that was connected to the old aircleaner. also there is a big diaphragm thing that was hanging off the driver side of the origanal air cleaner i think its the air induction system if i take it off then exhaust gases come out of a rubber hose and the engine wont idle, up and down ect. tried pluging it with a bolt but that made this splutering worse. im thinking about taking it to ultra tune but am worried they will give me a hard time for taking the anti polution stuff off and tell me thats why it doesnt run properly.
hmm should i just give up and put it all back to standard?? also this is the unleaded 1986 model engine if that makes any difference
|
|
|
