F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Would Wolf3D be good to use on 20 Valve Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
10sec_rx7 Forums Junkie Location: Syndey Registered: December 2002	Re: Would Wolf3D be good to use on 20 Valve Thu, 04 December 2003 09:51 the last 20v i tuned made 92kw at the wheels with a microtech, very very restrictave exhaust and headers (2 1/4 press bent 4-2-1 headers), the power was dropping off really bad over 6000rpm where the 20v should be making more power, just got back from the dyno now, tuned a 4AGZE, made 102kw with another bad exhaust, it was a 2in mandral bent and really holding it back, after driving the car last night with no exhaust i can tell there is another 20 or so KW hiding there. Microtech are the best value for money, nice to install and quick to tune well, most of the dynos take between 1 hour and 2.5 hours, the 4agze took 1 hour but the 20v's tend to take around 2 hours as they are a little tricky to get the maps spot on and make the power. the bloke who owns the dyno i use has had a wolf on the rollers for 4-5 hours and it still is no where near right.. and he knows what he is doing so there is $500+ just in dyno time. Dale [Report message to a moderator]

	Subject	Poster	Date
	Would Wolf3D be good to use on 20 Valve	2DVIOS	Wed, 03 December 2003 07:53
	Re: Would Wolf3D be good to use on 20 Valve	10sec_rx7	Wed, 03 December 2003 21:51
	Re: Would Wolf3D be good to use on 20 Valve	._T_.	Wed, 03 December 2003 21:53
	Re: Would Wolf3D be good to use on 20 Valve	86twinky	Wed, 03 December 2003 22:08
	Re: Would Wolf3D be good to use on 20 Valve	onejayzed	Thu, 04 December 2003 03:01
	Re: Would Wolf3D be good to use on 20 Valve	10sec_rx7	Thu, 04 December 2003 05:25
	Re: Would Wolf3D be good to use on 20 Valve	86twinky	Thu, 04 December 2003 03:09
	Re: Would Wolf3D be good to use on 20 Valve	CrUZsida	Thu, 04 December 2003 03:46
	Re: Would Wolf3D be good to use on 20 Valve	Johnny	Thu, 04 December 2003 04:20
	Re: Would Wolf3D be good to use on 20 Valve	CrUZsida	Thu, 04 December 2003 04:24
	Re: Would Wolf3D be good to use on 20 Valve	Johnny	Fri, 05 December 2003 04:29
	Re: Would Wolf3D be good to use on 20 Valve	onejayzed	Thu, 04 December 2003 05:50
	Re: Would Wolf3D be good to use on 20 Valve	86twinky	Thu, 04 December 2003 04:15
	Re: Would Wolf3D be good to use on 20 Valve	86twinky	Thu, 04 December 2003 04:54
	Re: Would Wolf3D be good to use on 20 Valve	CrUZsida	Thu, 04 December 2003 05:21
	Re: Would Wolf3D be good to use on 20 Valve	86twinky	Thu, 04 December 2003 05:37
	Re: Would Wolf3D be good to use on 20 Valve	10sec_rx7	Thu, 04 December 2003 09:51
	Re: Would Wolf3D be good to use on 20 Valve	CrUZsida	Fri, 05 December 2003 05:50
	Re: Would Wolf3D be good to use on 20 Valve	spoon33	Tue, 22 June 2004 12:12
	Re: Would Wolf3D be good to use on 20 Valve	oldcorollas	Tue, 22 June 2004 16:42
	Re: Would Wolf3D be good to use on 20 Valve	IRA11Y	Tue, 22 June 2004 23:13
	Re: Would Wolf3D be good to use on 20 Valve	10sec_rx7	Wed, 23 June 2004 05:55

Previous Topic:	Cressida LSD
Next Topic:	Wheel Nuts coming un-done

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.