F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » XT132 Corona brakes Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ed_ma61 Forums Junkie Location: Lost in the K hole Registered: May 2002	Re: XT132 Corona brakes Fri, 05 December 2003 13:12 is he still running the stock 14" wheels? if so, he may have to machine out the inside of the rim to acomodate the rotor and caliper assembly. this will get around any concerns he may have with regards to increasing wheel sizes outside the well known +2 rule, and thus avoid further problems with the pigs... suggested setup? i think the entire upright assembly out of an MA70 will swap straight into the corona as they are both based on the same floorplan (hence why the 2jz conversion is so easy in this chassis...) that will get you 300+mm rotors which should pull it up nicely... [Report message to a moderator]

	Subject	Poster	Date
	XT132 Corona brakes	Cool1	Fri, 05 December 2003 13:06
	Re: XT132 Corona brakes	ed_ma61	Fri, 05 December 2003 13:12
	Re: XT132 Corona brakes	Cool1	Fri, 05 December 2003 13:17
	Re: XT132 Corona brakes	gianttomato	Fri, 05 December 2003 13:33
	Re: XT132 Corona brakes	Cool1	Fri, 05 December 2003 13:35
	Re: XT132 Corona brakes	gianttomato	Fri, 05 December 2003 13:50
	Re: XT132 Corona brakes	Cool1	Fri, 05 December 2003 13:56
	Re: XT132 Corona brakes	Grega	Fri, 05 December 2003 22:08
	Re: XT132 Corona brakes	Cool1	Sat, 06 December 2003 03:22
	Re: XT132 Corona brakes	ra23celica	Sat, 06 December 2003 12:23
	Re: XT132 Corona brakes	ed_ma61	Sat, 06 December 2003 12:59
	Re: XT132 Corona brakes	Cool1	Sat, 06 December 2003 13:56

Previous Topic:	Computer for 1G-gte
Next Topic:	ae92 oil cooler??

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.