| Author | Topic |
|---|
Location:
Perth
Registered:
August 2002
|
|
Re: Need new motor for SV21 thinking of 3sgte?
|
Sun, 04 August 2002 15:23
 
|
 |
Hello
As far as I know the drive shafts will fit in fine but the gear forks come in from the wrong direction. There is a panel you can remove of the mr2 gearbox to make the forks work but then you have to weld a panel over the original fork entrance.
I hope I got the right. Somone tell me if its wrong coz im doing the same conversion in the near future.
Thanks-
|
|
|
| | Subject | Poster | Date |
|---|
 |
Need new motor for SV21 thinking of 3sgte?
|
bendev | Mon, 01 July 2002 13:54 |
|
Re: Need new motor for SV21 thinking of 3sgte?
|
SXer | Tue, 02 July 2002 03:32 |
|
Re: Need new motor for SV21 thinking of 3sgte?
|
rob_RA40 | Tue, 02 July 2002 03:54 |
|
Re: Need new motor for SV21 thinking of 3sgte?
|
Cool1 | Tue, 02 July 2002 08:50 |
|
Re: Need new motor for SV21 thinking of 3sgte?
|
bendev | Tue, 02 July 2002 09:18 |
|
Re: Need new motor for SV21 thinking of 3sgte?
|
Cool1 | Tue, 02 July 2002 09:35 |
|
Re: Need new motor for SV21 thinking of 3sgte?
|
bendev | Wed, 03 July 2002 01:00 |
|
Re: Need new motor for SV21 thinking of 3sgte?
|
Cool1 | Wed, 03 July 2002 08:36 |
|
Re: Need new motor for SV21 thinking of 3sgte?
|
shane11r | Sun, 04 August 2002 15:23 |
|
Re: Need new motor for SV21 thinking of 3sgte?
|
shane11r | Sun, 04 August 2002 15:25 |
|
Re: Need new motor for SV21 thinking of 3sgte?
|
wizzfizz2097 | Tue, 06 August 2002 02:34 |
