F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Cutting gear stick down Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
waynewatson Regular Location: Brisbane Registered: May 2003	Re: Cutting gear stick down Mon, 22 December 2003 00:46 If you take 100mm off, you'll NEVER EVER be able to change gear again. You can heat the ball and move it up the shaft about 10mm from memory. That's about the same as chopping 20mm off the top of the shaft. PS: when I said heat, you're better off taking it to someone with a press. They're bastards to move. [Report message to a moderator]

	Subject	Poster	Date
	Cutting gear stick down	hotrolla	Sun, 21 December 2003 06:03
	Re: Cutting gear stick down	T APLUS 22	Sun, 21 December 2003 06:41
	Re: Cutting gear stick down	St3ve_AE92	Sun, 21 December 2003 06:56
	Re: Cutting gear stick down	Necros	Sun, 21 December 2003 07:29
	Re: Cutting gear stick down	hotrolla	Sun, 21 December 2003 08:42
	Re: Cutting gear stick down	oldcorollas	Sun, 21 December 2003 13:02
	Re: Cutting gear stick down	ed_ma61	Sun, 21 December 2003 13:19
	Re: Cutting gear stick down	STR8 2.8	Sun, 21 December 2003 13:32
	Re: Cutting gear stick down	waynewatson	Mon, 22 December 2003 00:46
	Re: Cutting gear stick down	gianttomato	Tue, 23 December 2003 00:06
	Re: Cutting gear stick down	onejayzed	Tue, 23 December 2003 07:49
	Re: Cutting gear stick down	boj01	Tue, 23 December 2003 10:06
	Re: Cutting gear stick down	IRA11Y	Tue, 23 December 2003 10:12
	Re: Cutting gear stick down	waynewatson	Wed, 24 December 2003 00:29
	Re: Cutting gear stick down	RobST162	Wed, 24 December 2003 00:37
	Re: Cutting gear stick down	mrshin	Wed, 24 December 2003 12:06
	Re: Cutting gear stick down	hotrolla	Wed, 24 December 2003 12:42
	Re: Cutting gear stick down	Sam_Q	Wed, 24 December 2003 22:50

Previous Topic:	Neat 4agze instlation!
Next Topic:	front wheel bearing on AE86 - have boguht bearings, have pretty good idea how to replace them.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.