F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 6MGE Bottom end part nos Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ed_ma61 Forums Junkie Location: Lost in the K hole Registered: May 2002	Re: 6MGE Bottom end part nos Mon, 22 December 2003 09:25 here yous goes... (i cant find the ring pn#'s at the moment- sorry. 6m is not listed in the acl cat, and im not sure if the ring lands of the 6m are the same size as the 5m or 7m - would need a piston out to actually measure and check...) (and also - i 'may' have the rod and mains pn#'s reversed... please check for yourselves) Rod big-end bearings (std size) ACL pn# 6B1170 STD Main crcank bearings (std size) ACL pn# 7M1165 STD Thrust washers (std size) ACL pn# 2T7962 STD Toyota Oil Filter Toyota pn# 90915-YZZB3 Toyota Block Deck Dowel Pins Toyota pn# T9025008120 i dont have info on seals or gaskets as i just bought a whole lower end kit off ebay for cheap... [Report message to a moderator]

	Subject	Poster	Date
	6MGE Bottom end part nos	CrUZsida	Sun, 21 December 2003 09:47
	Re: 6MGE Bottom end part nos	ed_ma61	Sun, 21 December 2003 12:53
	Re: 6MGE Bottom end part nos	chrisss	Mon, 22 December 2003 08:01
	Re: 6MGE Bottom end part nos	ed_ma61	Mon, 22 December 2003 08:51
	Re: 6MGE Bottom end part nos	ed_ma61	Mon, 22 December 2003 09:25

Previous Topic:	home turbo rebuild?
Next Topic:	xt130 struts?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.