| Author | Topic |
|---|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: New 7MGTE, or rebuild current one?
|
Tue, 06 August 2002 06:07
 
|
 |
what do you mean by rebuild the bottom end exactly?? i mean if youre planning on including a bore/hone, its unlikely that you'd be able to reuse the pistons as you'd obviously need the next size up. then theres the problem of if its been bored already during its last build (when the forgies went in), as to whether or not the cyl can take another bore (MAX is 85.5mm, and acl only do a 40thou over (84mm) piston anyway).
all depends on the bore cond i guess, but if its in the slightest bit dodgy, id bore em. hell if the engines out, why not.
then you'd be looking at a possible crank grind, full balance, bearings, rod re-bush, oil pump (perhaps), seals, welch (sic) plugs, rings, block deck. then head: valve seats, grind, seals, face. and thers the possibility that your cam journals/bearings are dead which means at least a new cam, perhaps a new head.
if it all goes to hell and you end up not going for the rebuild, depending on size/condition of pistons, i know someone how would be very interested in buying them 
cheers
ed
|
|
|
| | Subject | Poster | Date |
|---|
 |
New 7MGTE, or rebuild current one?
|
SupraPete | Tue, 06 August 2002 03:20 |
|
Re: New 7MGTE, or rebuild current one?
|
666supra | Tue, 06 August 2002 03:36 |
|
Re: New 7MGTE, or rebuild current one?
|
SupraPete | Tue, 06 August 2002 04:59 |
|
Re: New 7MGTE, or rebuild current one?
|
ed_ma61 | Tue, 06 August 2002 06:07 |
|
Re: New 7MGTE, or rebuild current one?
|
SupraPete | Tue, 06 August 2002 06:41 |
|
Re: New 7MGTE, or rebuild current one?
|
Norbie | Tue, 06 August 2002 07:57 |
|
Re: New 7MGTE, or rebuild current one?
|
| Tue, 06 August 2002 08:24 |
|
Re: New 7MGTE, or rebuild current one?
|
gianttomato | Tue, 06 August 2002 08:32 |
|
Re: New 7MGTE, or rebuild current one?
|
ae102_3sgte | Tue, 06 August 2002 10:42 |
|
Re: New 7MGTE, or rebuild current one?
|
SUPRAGTE | Tue, 06 August 2002 11:26 |
|
Re: New 7MGTE, or rebuild current one?
|
ed_ma61 | Tue, 06 August 2002 12:29 |
|
Re: New 7MGTE, or rebuild current one?
|
SupraPete | Wed, 07 August 2002 00:23 |
|
Re: New 7MGTE, or rebuild current one?
|
gianttomato | Wed, 07 August 2002 01:49 |
|
Re: New 7MGTE, or rebuild current one?
|
ae102_3sgte | Wed, 07 August 2002 01:52 |
|
Re: New 7MGTE, or rebuild current one?
|
SUPRAGTE | Thu, 08 August 2002 03:00 |
|
Re: New 7MGTE, or rebuild current one?
|
ed_ma61 | Thu, 08 August 2002 04:01 |
|
Re: New 7MGTE, or rebuild current one?
|
SupraPete | Thu, 08 August 2002 04:33 |
|
Re: New 7MGTE, or rebuild current one?
|
SUPRAGTE | Fri, 09 August 2002 14:13 |
|
Re: New 7MGTE, or rebuild current one?
|
SupraPete | Sun, 11 August 2002 23:16 |
|
Re: New 7MGTE, or rebuild current one?
|
SUPRAGTE | Mon, 12 August 2002 01:08 |
|
Re: New 7MGTE, or rebuild current one?
|
SupraPete | Mon, 12 August 2002 02:01 |
|
Re: New 7MGTE, or rebuild current one?
|
gianttomato | Mon, 12 August 2002 02:41 |
|
Re: New 7MGTE, or rebuild current one?
|
SupraPete | Mon, 12 August 2002 03:37 |
| Current Time:
Wed Apr 16 04:07:48 UTC 2025 |
Total time taken to generate the page: 0.0065720081329346 seconds |
