F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » engine bay and intake temperatures... Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ed_ma61 Forums Junkie Location: Lost in the K hole Registered: May 2002	Re: engine bay and intake temperatures... Fri, 26 December 2003 14:12 yeah, the heat shield is to come, but these extractors radiate/conduct a massively larger amount of heat than the sttock 10mm thick cast manifold... theyre only very thin walled, and i wouldnt be surpried if they glowed red hot on a hard run... and the pickup for the intake is just in front of all this, and runs directly over it... ive been reading figures of 1% decrease in rwhp for every 10deg F increase in intake temp. now assuming i have had an intake temp increase of ~80deg Celsius, that would be 144deg Fahrenheit, equating to (supposedly) a 14.4% decrease in power. lets assume she should be 190rwhp, less 14.4%, thats gives us an estimated 162rwhp... which is kinda close to the 150's that ive been recording. to fully account for the hp loss though :: 21% = 210deg F increase = 116deg C ...which id think is a little unlikely... add that to the list of ecu woes, and maybe im getting close.... any thoughts? cheers ed [Report message to a moderator]

	Subject	Poster	Date
	engine bay and intake temperatures...	ed_ma61	Fri, 26 December 2003 13:10
	Re: engine bay and intake temperatures...	Danish	Fri, 26 December 2003 13:43
	Re: engine bay and intake temperatures...	justcallmefrank	Fri, 26 December 2003 13:52
	Re: engine bay and intake temperatures...	ed_ma61	Fri, 26 December 2003 14:12
	Re: engine bay and intake temperatures...	M.W.P.	Fri, 26 December 2003 14:17
	Re: engine bay and intake temperatures...	ed_ma61	Fri, 26 December 2003 14:26
	Re: engine bay and intake temperatures...	gianttomato	Fri, 26 December 2003 21:49
	Re: engine bay and intake temperatures...	ed_ma61	Sat, 27 December 2003 09:55
	Re: engine bay and intake temperatures...	ed_ma61	Sat, 27 December 2003 10:25
	Re: engine bay and intake temperatures...	BlackSupra	Sat, 27 December 2003 11:42
	Re: engine bay and intake temperatures...	M.W.P.	Sat, 27 December 2003 11:47
	Re: engine bay and intake temperatures...	clubagreenie	Sat, 27 December 2003 12:04
	Re: engine bay and intake temperatures...	BlackSupra	Sat, 27 December 2003 12:08
	Re: engine bay and intake temperatures...	M.W.P.	Sun, 28 December 2003 10:05
	Re: engine bay and intake temperatures...	ed_ma61	Sat, 27 December 2003 12:24
	Re: engine bay and intake temperatures...	BlackSupra	Sun, 28 December 2003 07:39
	Re: engine bay and intake temperatures...	ed_ma61	Sat, 27 December 2003 13:01
	Re: engine bay and intake temperatures...	ZZT231	Mon, 29 December 2003 13:55
	Re: engine bay and intake temperatures...	Allan	Mon, 29 December 2003 15:35
	Re: engine bay and intake temperatures...	DiZ_	Sat, 27 December 2003 13:04
	Re: engine bay and intake temperatures...	draven	Sat, 27 December 2003 15:27
	Re: engine bay and intake temperatures...	ed_ma61	Sun, 28 December 2003 08:06
	Re: engine bay and intake temperatures...	BlackSupra	Sun, 28 December 2003 09:51
	Re: engine bay and intake temperatures...	ed_ma61	Sun, 28 December 2003 10:24
	Re: engine bay and intake temperatures...	BlackSupra	Sun, 28 December 2003 10:20
	Re: engine bay and intake temperatures...	BlackSupra	Sun, 28 December 2003 10:31
	Re: engine bay and intake temperatures...	ed_ma61	Sun, 28 December 2003 10:49
	Re: engine bay and intake temperatures...	supra1jz	Tue, 30 December 2003 01:16
	Re: engine bay and intake temperatures...	BlackSupra	Tue, 30 December 2003 07:25
	Re: engine bay and intake temperatures...	ed_ma61	Tue, 30 December 2003 07:33
	Re: engine bay and intake temperatures...	BlackSupra	Tue, 30 December 2003 08:10
	Re: engine bay and intake temperatures...	ed_ma61	Tue, 30 December 2003 08:15
	Re: engine bay and intake temperatures...	BlackSupra	Tue, 30 December 2003 10:48

Previous Topic:	who's done the 2TGZEU ?
Next Topic:	KE25 Diff Question

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.