F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 2TG cam specs Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
thetoyman75 Forums Junkie Club President I supported Toymods Location: Sydney Registered: May 2002	Re: 2TG cam specs Wed, 31 December 2003 08:46 Benny, The only 2TG cam specs I have are these: 2T-G Engine modifications as per April 1973 were from Engine Number 2T-8038333 Firing Order: 1-3-4-2 Ignition Timing: 16 Degrees BTDC / 800 rpm Compression ratio: 9.8:1 Bore and Stroke: 85.0 x 70.0 Valve Size: Intake – 43mm (Up to April 1973) – 44.5mm (April 1973 Onwards) Exhaust – 37mm (Up to April 1973) – 38.5mm (April 1973 Onwards) Cam Shaft: Lobe Height In 45.87 ~ 45.97 (Up to April 1973) Lobe Height In 46.37 ~ 46.47 (April 1973 Onwards) Lobe Height Ex 45.87 ~ 45.97 (Up to April 1973) Lobe Height Ex 46.37 ~ 46.47 (April 1973 Onwards) Cam Lift: In 9.82 (Up to April 1973) In 10.27 (April 1973 Onwards) Thats the specs for the 88220 and 88222 Cams. Shame they don't lift Cam Duration. Ex 9.82 (Up to April 1973) Ex 10.27 (April 1973 Onwards) [Updated on: Wed, 31 December 2003 08:51] [Report message to a moderator]

	Subject	Poster	Date
	2TG cam specs	BigBadBenny	Sun, 28 December 2003 05:57
	Re: 2TG cam specs	BigBadBenny	Tue, 30 December 2003 10:46
	Re: 2TG cam specs	ta2272	Tue, 30 December 2003 13:56
	Re: 2TG cam specs	BigBadBenny	Wed, 31 December 2003 00:32
	Re: 2TG cam specs	thetoyman75	Wed, 31 December 2003 08:46

Previous Topic:	Exhaust Flange Gasket job.... worried!
Next Topic:	Wilwood Calipers road legal?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.