| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Choosing Springs
|
Thu, 01 January 2004 05:51
 
|
 |
Norbs, with the same 5M-E up the front I think the weight balance should be ok if I fit the SA63 struts with MA61 springs, on a side note do SA63 struts have the same top / bottom spring seats? (or will I need to source a set of MA61 top seats?)
MX62 is meant to weigh about 1250kg's so similar to a MA61.
Good, I was also under the impression that resetting the spring rate was not possible (but someone was saying differently somewhere so I'd thought I make sure).
Does Kings MA61 lows with the MX62 KYB's in the front (and later 30mm RCA's) and MX62 Kings standard height (they don't make lows) in the rear reset 40mm lower (monroes atm, but KYB's later) sound ok?
BTW what are you doing with ur MA61 mags when you get ur 17"'s ?
Cheers
Wilbo
|
|
|
| | Subject | Poster | Date |
|---|
 |
Choosing Springs
|
wilbo666 | Sun, 28 December 2003 02:41 |
|
Re: Choosing Springs
|
wilbo666 | Wed, 31 December 2003 07:32 |
|
Re: Choosing Springs
|
hiaaa | Wed, 31 December 2003 23:23 |
|
Re: Choosing Springs
|
Norbie | Thu, 01 January 2004 05:06 |
|
Re: Choosing Springs
|
wilbo666 | Thu, 01 January 2004 05:51 |
|
Re: Choosing Springs
|
Norbie | Thu, 01 January 2004 08:37 |
