| Author | Topic |
|---|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: Aftermarket gauge sender adapter sizes
|
Mon, 05 January 2004 02:08
|
 |
can confirm 100% that the oil sender is 1/8NPT - was the same on my 2T even and on my 4AGE!
be careful with it though - as you may find the sender that goes in the hole is too wide and will foul on the block! my autometer one did so i mounted it elsewhere in my oil cooler plumbing.
not sure on the water one, i had a special made up by meridian motorsport for me...using an alloy speedflow fitting tigged to the original housing (coz the thread was knackered)
|
|
|
