Toymods Car Club Inc: The Outhouse => September 11 Conspiracies... :P

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » The Outhouse » September 11 Conspiracies... :P Show: Today's Posts :: Show Polls Email to friend

Author

Topic

gt20v
Regular

Registered:
July 2002

Re: September 11 Conspiracies... :P

Mon, 05 January 2004 14:04

ed_ma61 wrote on Tue, 06 January 2004 00:21

untill you care to tell me about

-the prevailing winds
-the air flow around the towers
-the exact distribution of fuel
-the thermal air shifts occuring due to burning fuel
-the internal functional structure of the building
-the internal air flow of the buildings both pre and post collision
-the air supply, and the exhaust gas flow routes from the fire
-the heat of combustion, lean/rich air supply
-the thermal conductivity of the structures
-the exact stresses both thermal and mechanical placed on all structures

then maybe you can pass comment on the feasability of a tower falling in a particular way

until then - please give up

please be sensible, but seriously, even if the jet fuel was burning inside the building, it would've been burning REAL LEAN, as there's no way there's enough oxygen to feed that amount of jet fuel and the only thing that came out of the tower was white smoke. Thus the heat of the combustion is "too low" to melt steel

now even if there was any airflow around the tower, the only difference it would've made would be: the direction in which the tower will tilt while falling, but in this case, the tower fell straight down, did you think the wind really made ANY difference???

the thermal conductivity of the tower would've been low, the sprinklers in theory should be working fine, the materials should be at least 2-3 hours fire proof, now don't tell me it was jet fuel that caused the combustion temp. to be higher thus less fire proof, because #1, there wasn't enough jet fuel in tower2, and #2, the fuel was burning lean, reason 1, there's not enough airflow inside the building to bring in fresh oxygen, #2 due to the high alt. of the tower thus the thinning of oxygen anyway. thus lean mixture

Quote:

then maybe you can pass comment on the feasability of a tower falling in a particular way

until then - please give up

If that is the case, then I don't think there's human beings, coz we'll all be alps because as soon as we start to learn to think, the evolution would have stopped, I don't know how old you are, but I remember education have taught us to make educated guess, it's a method of putting numbers together, and give a very good estimate, even though we don't know the exact conditions, but if you put all these together:

1) Low amount of jet fuel in tower #2 (compared to tower #1)
2) High alt of tower
3) Lean mixture of jet fuel
4) Low combustion temp.
5) High melting point of steel
6) You need a controlled combustion (certain amount of air to fuel) to create the temp. enough to melt metal
7) There's many metals to melt before the WTC will fall down into itself

did we really have the right environment to demolish 3 wtc into itself?

it's quite obvious that the "official" media report has very low credibility, but the government thought they'll chuck it at us anyway, the media report doesn't even go into as much detail as your post (ed_ma61) and the government doesn't even bother to research the topic even more, the information surrounding Sept 11 is closed, congress blocked further investigation. FBI released the names of all terrorist within days, the official report is released the next day, the site was cleared ASAP, all scrap metal was exported instantly, hundreds of billions of tax payer's money was spent on US defense, and it failed? Has it failed? Or was this whole thing a fraud? But the government doesn't want anybody to investigate it any further...

Please hand up those that still think the government is trying to do us any good? Sorry I just feel like rambling... Very Happy

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Sun Jun 29 06:50:39 UTC 2025

Total time taken to generate the page: 0.013747930526733 seconds

.:: Contact :: Home ::.