| Author | Topic |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
Re: ignition system on carbed 4ag
|
Thu, 08 January 2004 05:13
 
|
 |
Yeah, i've got a custom made scorcher distributor on my 4AG. It runs to a Jaycar transistor spark box thingy. Keeps the points clean, yes, very early scorcher, they will build a new one now, high volt system, for around 400+
I was going to go the jaycar programmable box, but my dad bought the scorcher before i could tell him not to. It would be nicer to have a solid state ignition.
I don't have any vacuum advance, so fuel economy and part throttle could be improved a bit.
http://www.racingstrong.com/RSeLite/dizzy.asp
Some more ideas, If you can find a k-series dizzy with a electric module, you are half way there, I don't know what revs a stock k-series would go to though.
Or you can always run the 4AGE computer sans injectors, apparently this works ok, and i wouldn't see why it wouldn't work. You'd need to adapt the tps and somehow get a steady vacuum reading for the MAP sensor. Nothing too difficult.
Daniel
|
|
|
