| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
Re: 18R-G tech help
|
Thu, 08 January 2004 13:52
 
|
 |
sounds like timing is way out (header flames/pop/explosions says engine is firing when exhaust valve is open)
do a static time on it (gap points correctly if required, set piston 1 to TDC; rotate backwards to 10 degree mark on timing cover, manually rotate dizzi so points trigger piston 1 t fire) to set the basic timing to 10 degrees advance - anything should start with that
also, when i first fired up the turbo celica, it had major exhaust popping and refusal to run - turned out i had got the rotation in the dizzi wrong way around (3 & 2 were at wrong spot) so do a manual check on dizzi rotation and timing
1342 'looks' like correct order of firing by my Haynes celica manual but's way too late to be peering under the hood of my car - neighbors will think someone's trying to nick it.
charles.
|
|
|
| | Subject | Poster | Date |
|---|
 |
18R-G tech help
|
Timmy Turbo | Thu, 08 January 2004 13:36 |
|
Re: 18R-G tech help
|
thechuckster | Thu, 08 January 2004 13:52 |
|
Re: 18R-G tech help
|
CLG | Thu, 08 January 2004 13:52 |
|
Re: 18R-G tech help
|
CelicaRA45 | Thu, 08 January 2004 21:46 |
|
Re: 18R-G tech help
|
wil8115 | Fri, 09 January 2004 01:56 |
|
Re: 18R-G tech help
|
Steve M | Fri, 09 January 2004 02:03 |
|
Re: 18R-G tech help
|
wil8115 | Fri, 09 January 2004 02:15 |
|
Re: 18R-G tech help
|
CLG | Fri, 09 January 2004 02:22 |
|
Re: 18R-G tech help
|
o_man_ra23 | Fri, 09 January 2004 10:24 |
|
Re: 18R-G tech help
|
Timmy Turbo | Sat, 10 January 2004 00:54 |
|
Re: 18R-G tech help
|
Jason | Sun, 11 January 2004 01:16 |
|
Re: 18R-G tech help
|
Steve M | Mon, 12 January 2004 00:20 |
