F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 18R-G tech help Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
wil8115 Regular Location: Seattle area, USA Registered: June 2002	Re: 18R-G tech help Fri, 09 January 2004 02:15 not the best ascii work sorry. the lobes are pointing away from each other. intake to about 10'o-clock and Ex to about 2'o-clock hope that is better. Not quite flat(9-3) but away for sure. If that is confusing the little sqaure cut outs in the cam right by the front cam cap should be pointing 12'o-clock both of them. [Report message to a moderator]

	Subject	Poster	Date
	18R-G tech help	Timmy Turbo	Thu, 08 January 2004 13:36
	Re: 18R-G tech help	thechuckster	Thu, 08 January 2004 13:52
	Re: 18R-G tech help	CLG	Thu, 08 January 2004 13:52
	Re: 18R-G tech help	CelicaRA45	Thu, 08 January 2004 21:46
	Re: 18R-G tech help	wil8115	Fri, 09 January 2004 01:56
	Re: 18R-G tech help	Steve M	Fri, 09 January 2004 02:03
	Re: 18R-G tech help	wil8115	Fri, 09 January 2004 02:15
	Re: 18R-G tech help	CLG	Fri, 09 January 2004 02:22
	Re: 18R-G tech help	o_man_ra23	Fri, 09 January 2004 10:24
	Re: 18R-G tech help	Timmy Turbo	Sat, 10 January 2004 00:54
	Re: 18R-G tech help	Jason	Sun, 11 January 2004 01:16
	Re: 18R-G tech help	Steve M	Mon, 12 January 2004 00:20

Previous Topic:	Turbo Manifold
Next Topic:	5ME Oil Change - 3L ?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.