Toymods Car Club Inc: Tech & Conversions => Camry questions OR please help an uneducated noob

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » Camry questions OR please help an uneducated noob Show: Today's Posts :: Show Polls Email to friend

Author

Topic

crazy_camry
Regular

Location:
sydney
Registered:
April 2003

Re: Camry questions OR please help an uneducated noob

Fri, 09 January 2004 08:02

CamryMan wrote on Wed, 31 December 2003 23:27

If you want to go extreme you can punch a hole in the left inside fender and feed pipe into the emtpy fender chamber, with a pod at the end. That's been done in America. You have to be careful when it rains because water can splash the pod.

this is exactly what i have done, i used 3" piping, though ithink 2.5" would have been better as this is what most people are using. also this means you dont have to hole the metal, the stock hole where the resonator joins the inlet path can be opened a tad wider. i think hydrolock would only be a problem if the filter was/nearly submerged, i'm still careful in the rain though.

CamryMan wrote on Wed, 31 December 2003 23:27

Stiff shocks are hard to come by for SV21 Camry. Bilstein, KYB, Koni don't make them. At the time I got mine only Pedders VRD was the closest match. You might also be luck that kmac might make a camber/castor kit.

shocks for the SV21 are listed on KYB's website

if you're looking for power you can get away with a good 3s-fte setup like im doing for about $3500, doing the work yourself. may not be entirely reliable though (ie due to overboosting and blowing the engine etc).

[Updated on: Fri, 09 January 2004 08:06]

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Tue Feb 11 14:34:47 UTC 2025

Total time taken to generate the page: 0.0057101249694824 seconds

.:: Contact :: Home ::.