| Author | Topic |
|---|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: 3TGTE Forged Pistons
|
Mon, 12 January 2004 02:08
 
|
 |
There may be some provision to address the compression ratio from the piston's perspective, by asking them not to machine the tops prior to delivery. People chasing a specific CR could then have them machined to suit, after checking clearances. You could also address head gasket selection and squish area if needs be, however this is not my interest in this thread - research for yourselves on this matter.
Ideally, and if we could get enough people interested, a set of piston's may be around $750-800 without the face machining. Does anyone have a stuffed 3TGTE piston suitable for measurements - all mine are still in engines?!?
|
|
|
| | Subject | Poster | Date |
|---|
 |
3TGTE Forged Pistons
|
CLG | Fri, 09 January 2004 02:07 |
|
Re: 3TGTE Forged Pistons
|
ta22celica_boy | Fri, 09 January 2004 05:25 |
|
Re: 3TGTE Forged Pistons
|
T APLUS 22 | Fri, 09 January 2004 05:27 |
|
Re: 3TGTE Forged Pistons
|
freakincage_com | Fri, 09 January 2004 19:02 |
|
Re: 3TGTE Forged Pistons
|
SeptemberSquallIndustries | Sat, 10 January 2004 12:49 |
|
Re: 3TGTE Forged Pistons
|
T APLUS 22 | Sat, 10 January 2004 16:06 |
|
Re: 3TGTE Forged Pistons
|
SeptemberSquallIndustries | Sun, 11 January 2004 04:57 |
|
Re: 3TGTE Forged Pistons
|
spoon_god | Sun, 11 January 2004 23:39 |
|
Re: 3TGTE Forged Pistons
|
CLG | Mon, 12 January 2004 02:08 |
|
Re: 3TGTE Forged Pistons
|
CLG | Mon, 19 January 2004 08:45 |
|
Re: 3TGTE Forged Pistons
|
CLG | Tue, 27 January 2004 16:52 |
|
Re: 3TGTE Forged Pistons
|
buttocks | Wed, 28 January 2004 15:05 |
|
Re: 3TGTE Forged Pistons
|
buttocks | Fri, 30 January 2004 03:11 |
|
Re: 3TGTE Forged Pistons
|
CLG | Fri, 30 January 2004 03:19 |
|
Re: 3TGTE Forged Pistons
|
buttocks | Fri, 30 January 2004 08:42 |
|
Re: 3TGTE Forged Pistons
|
CLG | Wed, 04 February 2004 14:21 |
