| Author | Topic |
|---|
I supported Toymods
Location:
NE Melbourne
Registered:
May 2002
|
|
Re: brake master cylinder enlarging
|
Fri, 09 August 2002 08:08
 
|
 |
oops, i guess the miss understanding is going both ways today.
i'm no expert with this, but my reccomendation would be for a road car to leave the booster on the car. however if you decided to delete it from your setup, it would not be too hard to setup.
if you made up a plate to block off the booster hole and mounted the master clyinder to that plate and make up a rod from the pedal. i suppose it would take a bit of stuffing around to get right, but the concept is easy. hey and while you're at it, set up twin master cylinders with bias adjustable rod between them for front and read!!! that would be very sweet!!!
|
|
|
| | Subject | Poster | Date |
|---|
 |
brake master cylinder enlarging
|
tanman | Thu, 08 August 2002 11:43 |
|
Re: brake master cylinder enlarging
|
mrshin | Thu, 08 August 2002 11:47 |
|
Re: brake master cylinder enlarging
|
tanman | Thu, 08 August 2002 11:57 |
|
Re: brake master cylinder enlarging
|
Cool1 | Thu, 08 August 2002 12:52 |
|
Re: brake master cylinder enlarging
|
gianttomato | Thu, 08 August 2002 13:09 |
|
Re: brake master cylinder enlarging
|
dorikin | Thu, 08 August 2002 15:37 |
|
Re: brake master cylinder enlarging
|
Grega | Thu, 08 August 2002 22:30 |
|
Re: brake master cylinder enlarging
|
dorikin | Fri, 09 August 2002 05:23 |
|
Re: brake master cylinder enlarging
|
Bugman | Fri, 09 August 2002 06:28 |
|
Re: brake master cylinder enlarging
|
dorikin | Fri, 09 August 2002 06:36 |
|
Re: brake master cylinder enlarging
|
Cool1 | Fri, 09 August 2002 07:40 |
|
Re: brake master cylinder enlarging
|
dorikin | Fri, 09 August 2002 07:47 |
|
Re: brake master cylinder enlarging
|
Cool1 | Fri, 09 August 2002 07:51 |
|
Re: brake master cylinder enlarging
|
dorikin | Fri, 09 August 2002 07:55 |
|
Re: brake master cylinder enlarging
|
Cool1 | Fri, 09 August 2002 07:58 |
|
Re: brake master cylinder enlarging
|
dorikin | Fri, 09 August 2002 08:08 |
|
Re: brake master cylinder enlarging
|
Cool1 | Fri, 09 August 2002 08:14 |
|
Re: brake master cylinder enlarging
|
Grega | Fri, 09 August 2002 08:22 |
|
Re: brake master cylinder enlarging
|
dorikin | Fri, 09 August 2002 08:36 |
|
Re: brake master cylinder enlarging
|
Grega | Fri, 09 August 2002 10:38 |
|
Re: brake master cylinder enlarging
|
pepsicola | Sat, 10 August 2002 09:02 |
|
Re: brake master cylinder enlarging
|
Karl_skewes | Sat, 10 August 2002 10:19 |
|
Re: brake master cylinder enlarging
|
TA22-3SGTE | Sat, 10 August 2002 11:49 |
|
Re: brake master cylinder enlarging
|
mrshin | Sat, 10 August 2002 12:09 |
