F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » engine building Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Flogbag Regular Location: Sydney (Campbelltown...!) Registered: December 2003	Re: engine building Wed, 14 January 2004 09:07 [quote title=de_rift wrote on Wed, 14 January 2004 18:02] Flogbag wrote on Wed, 14 January 2004 16:35 AFAIK you can just fit the complete water pump housing/pump from a 4ac to the 20v, and have the water outlets where you need them. If your getting a microtech, you don't need the dizzy. You'll have to spend about $1200 on the microtech including coils and ignitors though. From there you just need some sort of cranktrigger/angle sensor. Just about anything you can fit to the engine the microtech will run... crank angle sensor? wat type has anyone ever done this? wat type have they used? and about the water pump from a rwd wat do i do with that, i mean from the back of the pump it goes straight in to the head (would i go from the pump to the bottom of the ratiator then the one that goes into the head go to the top of the radiator?) and then the outlets at the back near the firewall...? theres the artical in the gallery about fitting a 20v in rwd trim properly but its a little vaige. anyone got pics.... [Report message to a moderator]

	Subject	Poster	Date
	engine building	Flogbag	Tue, 13 January 2004 11:57
	engine building	Flogbag	Tue, 13 January 2004 12:05
	Re: engine building	Dodgy_Haro	Tue, 13 January 2004 12:11
	Re: engine building	purpleminiep	Tue, 13 January 2004 12:15
	Re: engine building	Dodgy_Haro	Tue, 13 January 2004 12:30
	Re: engine building	onejayzed	Wed, 14 January 2004 01:41
	Re: engine building	GZE-STYLE	Wed, 14 January 2004 04:00
	Re: engine building	de_rift	Wed, 14 January 2004 04:06
	Re: engine building	oldcorollas	Wed, 14 January 2004 08:44
	Re: engine building	de_rift	Wed, 14 January 2004 10:56
	Re: engine building	purpleminiep	Wed, 14 January 2004 04:14
	Re: engine building	Flogbag	Wed, 14 January 2004 05:35
	Re: engine building	de_rift	Wed, 14 January 2004 07:02
	Re: engine building	Flogbag	Wed, 14 January 2004 09:07
	Re: engine building	Chris Davey	Wed, 14 January 2004 05:47
	Re: engine building	sideshow	Wed, 14 January 2004 07:44
	Re: engine building	Flogbag	Wed, 14 January 2004 11:37
	Re: engine building	EVOSTi	Thu, 15 January 2004 05:44

Previous Topic:	Jumpy Idle
Next Topic:	fly cutting pistons

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.