| Author | Topic |
|---|
I supported Toymods
Location:
melbourne
Registered:
June 2002
|
|
Re: quick one, will my 4AC starter motor bolt onto a JDM AE86 bellhousing
|
Fri, 16 January 2004 01:40
 
|
 |
well i know for a fact that the JDM bellhousing has the clutch on the drivers side, or the "away from the exhaust" side, and its on the passenger side of the poverty spec model.
this is the thing i am concerned about, the extractors that came with the engine supposedly will not fit with the australian spec bellhousing, if i was doing the exhaust myself i would just use the bellhousing and starter motor i have.
as far as the alternator goes, thanks for the offer, but dont bother checking, if the 4ac one fits and i can change the pulley i may fit it, but it is really a small problem.
if it is internally regulated, i can piss off the voltage regulator, weight reduction! woo hoo.
the alternator is on the drivers side of the engine, you cant use the 4ac brackets because the tensioning bracket bolts onto the totally different head.
thanks again
|
|
|
| | Subject | Poster | Date |
|---|
 |
quick one, will my 4AC starter motor bolt onto a JDM AE86 bellhousing
|
shinybluesteel | Thu, 15 January 2004 22:24 |
|
Re: quick one, will my 4AC starter motor bolt onto a JDM AE86 bellhousing
|
TurboRA28 | Fri, 16 January 2004 00:31 |
|
Re: quick one, will my 4AC starter motor bolt onto a JDM AE86 bellhousing
|
shinybluesteel | Fri, 16 January 2004 00:52 |
|
Re: quick one, will my 4AC starter motor bolt onto a JDM AE86 bellhousing
|
TurboRA28 | Fri, 16 January 2004 01:16 |
|
Re: quick one, will my 4AC starter motor bolt onto a JDM AE86 bellhousing
|
TurboRA28 | Fri, 16 January 2004 01:20 |
|
Re: quick one, will my 4AC starter motor bolt onto a JDM AE86 bellhousing
|
shinybluesteel | Fri, 16 January 2004 01:40 |
|
Re: quick one, will my 4AC starter motor bolt onto a JDM AE86 bellhousing
|
shinybluesteel | Sat, 17 January 2004 11:11 |
