| Author | Topic |
|---|
Location:
newcastle
Registered:
May 2002
|
|
Re: Revs, Revs, I need to see revs!!!!
|
Sun, 11 August 2002 12:26
 
|
 |
|
just guessing but usually if its was a 1 wire than that would be a (+wire) or (-wire) depending. this would be easy to find out with voltmeter on the end,turn the ac on and see if u get a reading if so its (+wire) so to work it just needs (+wire)from battery and bolted to the motor to work ,so if the wire from battery has a switch in it the pump can be harnesed so if its a three wire it has a (+wire) (_wire) and a (switchwire),that said it needs a (+wire)from the battery a wire from the (-terminal)or body and a switch wire which can just be a on off type switch or constant (+wire) to turn on or off this im not sure how to check other then circuit wire diagrams or trace the original harness hope this has help thats all i can offer im not an auto elect just a back_yarder trying to help a fellow toyota_freak.
|
|
|
