| Author | Topic |
|---|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
 CT20B info
|
Thu, 22 January 2004 12:00
|
 |
Ok I'm getting a manifold made up which will have my CT20B sitting with the flange facing down, but what I noticed was the oil feed and return line are not sitting on top. This obviously isn't going to allow the oil to drain away from the turbo so what I want to know is can the middle part of the turbo be turned around to have the oil feed/return lines on the bottom, but keep the turbine and compressor in the same position?
Hope that makes sense  
|
|
|
| | Subject | Poster | Date |
|---|
 |
CT20B info
|
Cool1 | Thu, 22 January 2004 12:00 |
|
Re: CT20B info
|
TurboRA28 | Thu, 22 January 2004 22:38 |
|
Re: CT20B info
|
Cool1 | Thu, 22 January 2004 23:01 |
|
Re: CT20B info
|
TurboRA28 | Thu, 22 January 2004 23:23 |
|
Re: CT20B info
|
gabe | Thu, 22 January 2004 23:30 |
|
Re: CT20B info
|
TurboRA28 | Thu, 22 January 2004 23:53 |
|
Re: CT20B info
|
Cool1 | Fri, 23 January 2004 00:51 |
|
Re: CT20B info
|
Stenno | Fri, 23 January 2004 00:58 |
|
Re: CT20B info
|
Cool1 | Fri, 23 January 2004 01:18 |
|
Re: CT20B info
|
Stenno | Fri, 23 January 2004 04:42 |
|
Re: CT20B info
|
Darkstar | Thu, 31 March 2005 04:30 |
