| Author | Topic |
|---|
I supported Toymods
Location:
Central Coast
Registered:
May 2002
|
|
Re: Testing impedance of spark plug leads
|
Thu, 22 January 2004 22:23
 
|
 |
| Quote: |
put the multimeter on 20k
anything from 5k to 15 k resistance in the lead is ok
usually leads will either be good or open circuit
and if one lead is bad replace them all
the rest will go soon aswell
|
Thanks mate! I tried it in 20k and it showed nothing. It just came up with a 1 which I thought was too high reading for that setting? Sorry I don't know that much about the impedance settings 
So if it was on the 20k setting it should show up anywhere between 5-15 on the screen? 
|
|
|
