| Author | Topic |
|---|
Location:
Gold Coast
Registered:
May 2002
|
|
Re: how to remove the stock tape/radio in an ma70
|
Fri, 23 January 2004 01:53
 
|
 |
You have to remove the black suround.
There is a screw under the hazards, as well as a screw on the side next to the shifter where your leg is.
If you have a manual you have to remove the gear knob.
If you have a Auto just put it in Drive or Neut.
Remove the ash tray.
Undo the two screws in the roof of the ash tray slot as well as the two side ones on the ash tray slot.
You can then remove the block dash cover.
Becareful of the hazard, window heater and cig lighter plugs, you will have to unplug them with "japhandbehinddash TM".
Once that is off you can remove the 4 screws holding the radio in. The whole Double Din unit then can come out.
|
|
|
