F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Turbo/blow through carb Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
gold28 Forums Junkie Location: Madrid - Spain Registered: August 2002	Re: Turbo/blow through carb Sat, 24 January 2004 09:05 Many people in Europe remove efi and install webber/dellorto type carbies, namely because they dan't have the same aftermarket efi gear we have here. Think about it, try getting big power gains using only the standard ECU, no affordable aftermarkey computers and no Japanese interceptor type computers. That doesn't mean that it is the better way to go. They use carbies because they work well on N/A engines without the technology that they can't get easily. For a forced induction car in Australia, your crazy not to use the technology available here. There are plenty of efi throttle bodies available that will bolt up to the webber manifold and do the job better, more efficiently and possibly cheaper in the long run. I have seen a Valiant 265 engine with these T/B's on it. It ran absolutly huge cams in it, bigger than the R/T race engines, yet was easy to drive and had heaps more midrange power. [Report message to a moderator]

	Subject	Poster	Date
	Turbo/blow through carb	mrshin	Tue, 20 January 2004 06:56
	Re: Turbo/blow through carb	thechuckster	Tue, 20 January 2004 10:20
	Re: Turbo/blow through carb	mrshin	Tue, 20 January 2004 12:26
	Re: Turbo/blow through carb	thechuckster	Tue, 20 January 2004 15:14
	Re: Turbo/blow through carb	mrshin	Wed, 21 January 2004 11:41
	Re: Turbo/blow through carb	thechuckster	Wed, 21 January 2004 14:00
	Re: Turbo/blow through carb	allencr	Wed, 21 January 2004 17:41
	Re: Turbo/blow through carb	mrshin	Thu, 22 January 2004 10:49
	Re: Turbo/blow through carb	Jayem	Thu, 22 January 2004 11:10
	Re: Turbo/blow through carb	mrshin	Thu, 22 January 2004 13:13
	Re: Turbo/blow through carb	Norbie	Fri, 23 January 2004 01:00
	Re: Turbo/blow through carb	alex_ta22	Fri, 23 January 2004 02:07
	Re: Turbo/blow through carb	mrshin	Fri, 23 January 2004 06:57
	Re: Turbo/blow through carb	alex_ta22	Fri, 23 January 2004 13:10
	Re: Turbo/blow through carb	mrshin	Fri, 23 January 2004 13:15
	Re: Turbo/blow through carb	gold28	Sat, 24 January 2004 09:05
	Re: Turbo/blow through carb	Jayem	Sat, 24 January 2004 11:35
	Re: Turbo/blow through carb	STR8 2.8	Sat, 24 January 2004 12:18
	Re: Turbo/blow through carb	mrshin	Sat, 24 January 2004 13:04
	Re: Turbo/blow through carb	mrshin	Sun, 25 January 2004 13:10
	Re: Turbo/blow through carb	Joshstix	Tue, 27 January 2004 04:12
	Re: Turbo/blow through carb	Norbie	Sun, 25 January 2004 13:24
	Re: Turbo/blow through carb	gold28	Mon, 26 January 2004 10:31

Previous Topic:	Speedo correction device
Next Topic:	R154A in a MX83

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.