| Author | Topic |
|---|
Location:
Helensvale, Queensland
Registered:
March 2003
|
|
5SFE / 3SGTE / Turbo questions :P
|
Tue, 27 January 2004 03:22
|
 |
Just a few questions. I am considering a 5SFTE project.
1. Will a stock 3sgte exhaust manifold from a st185 bolt directly onto a 5sfe?
2. Will a CT26 from a 7MGTE fit right into the 3s manifold, or do i need a CT26
3. What would happen if i didn't change the computer/injectors or anything, and just connected the turbo right up to the intake manifold (IE: where my pod is now) and just ran 7psi or whatever the stock is?
4. I havn't been able to find a proper answer to this anywhere yet... With a wastegate, say for a ct26, will it just open up a bit and control itself to keep the boost at 7psi, or do i have to connect it to something else apart from exhaust/intake/oil for it to function correctly?
5. If i was to get a stock top mount from a 3s or 4agze, could i just put it at the front of the car, as a budget solution, until i get a good front mount. Also, would a top mount work at all if i didn't have any bonnet vents, or would it not be any cooler at all, as it's closed in above the engine? Thanks guys
|
|
|
