F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 18rg rebuild Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Steve M Forums Junkie Location: Adelaide Registered: June 2003	Re: 18rg rebuild Thu, 29 January 2004 03:17 about the chains. There are good chains and then there are bad chains. A common practice now is for companies to make the rollers from curled sheet metal. It is hard to see the difference, but you can see small slits in the rollers. This is bad, occasionally one will fail under the pressure and you can end up with a fairly disasterous timing chain failure. It is well worth the effort finding chains without split rollers. Many of the AUS made chains are split, whereas the JAP chains tend to not have split rollers. [Report message to a moderator]

	Subject	Poster	Date
	18rg rebuild	silvercil40	Fri, 23 January 2004 14:05
	Re: 18rg rebuild	Mr DOHC	Sat, 24 January 2004 03:04
	Re: 18rg rebuild	silvercil40	Mon, 26 January 2004 10:54
	Re: 18rg rebuild	Jason	Mon, 26 January 2004 23:58
	Re: 18rg rebuild	silvercil40	Tue, 27 January 2004 05:32
	Re: 18rg rebuild	Jason	Tue, 27 January 2004 06:14
	Re: 18rg rebuild	Mr DOHC	Tue, 27 January 2004 07:24
	Re: 18rg rebuild	24 crt panny	Wed, 28 January 2004 01:18
	Re: 18rg rebuild	Norbie	Wed, 28 January 2004 01:45
	Re: 18rg rebuild	Mr DOHC	Wed, 28 January 2004 08:15
	Re: 18rg rebuild	24 crt panny	Thu, 29 January 2004 00:57
	Re: 18rg rebuild	Steve M	Thu, 29 January 2004 03:17
	Re: 18rg rebuild	wil8115	Tue, 09 March 2004 08:46
	Re: 18rg rebuild	people100	Tue, 09 March 2004 10:00
	Re: 18rg rebuild	Mr DOHC	Wed, 10 March 2004 07:46
	Re: 18rg rebuild	raistlin	Tue, 09 March 2004 22:43
	Re: 18rg rebuild	wil8115	Wed, 10 March 2004 07:58

Previous Topic:	AE86 Sprinter SR20DET conversion?
Next Topic:	Tailshaft Loop - Toynats

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.