| Author | Topic |
|---|
Location:
1st street on the right
Registered:
November 2002
|
|
Re: Can cylinders be bored eccentric???
|
Fri, 30 January 2004 07:49
 
|
 |
Yes it can be done, it's called align boring, usually to align the bores over the crank though. Not to align the bores with the head chambers. It's done to reduce side loading on the rod bearings. The machinist needs to assemble the whole bottom end assy and measure the location of the rod bearings in relation to the bores. It also uses some wizbang machining technique and must go oversize for the obvious reasons.
I'm yet to find someone wiling to do it.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Can cylinders be bored eccentric???
|
Jayem | Thu, 29 January 2004 20:56 |
|
Re: Can cylinders be bored eccentric???
|
T APLUS 22 | Thu, 29 January 2004 21:13 |
|
Re: Can cylinders be bored eccentric???
|
Jayem | Thu, 29 January 2004 21:39 |
|
Re: Can cylinders be bored eccentric???
|
justcallmefrank | Thu, 29 January 2004 23:41 |
|
Re: Can cylinders be bored eccentric???
|
wagonist | Fri, 30 January 2004 01:15 |
|
Re: Can cylinders be bored eccentric???
|
Asher | Fri, 30 January 2004 04:06 |
|
Re: Can cylinders be bored eccentric???
|
purpleminiep | Fri, 30 January 2004 06:23 |
|
Re: Can cylinders be bored eccentric???
|
ed_ma61 | Fri, 30 January 2004 06:30 |
|
Re: Can cylinders be bored eccentric???
|
YelloRolla | Fri, 30 January 2004 07:07 |
|
Re: Can cylinders be bored eccentric???
|
clubagreenie | Fri, 30 January 2004 07:49 |
|
Re: Can cylinders be bored eccentric???
|
Scorpion | Fri, 30 January 2004 08:23 |
|
Re: Can cylinders be bored eccentric???
|
Jayem | Fri, 30 January 2004 09:54 |
|
Re: Can cylinders be bored eccentric???
|
Jayem | Fri, 30 January 2004 10:38 |
|
Re: Can cylinders be bored eccentric???
|
slydar | Fri, 30 January 2004 09:32 |
|
Re: Can cylinders be bored eccentric???
|
ed_ma61 | Fri, 30 January 2004 10:40 |
|
Re: Can cylinders be bored eccentric???
|
Jayem | Fri, 30 January 2004 10:50 |
|
Re: Can cylinders be bored eccentric???
|
gold28 | Fri, 30 January 2004 11:01 |
|
Re: Can cylinders be bored eccentric???
|
Jayem | Fri, 30 January 2004 12:06 |
|
Re: Can cylinders be bored eccentric???
|
mrshin | Fri, 30 January 2004 11:13 |
|
Re: Can cylinders be bored eccentric???
|
Bill Sherwood | Fri, 30 January 2004 12:15 |
|
Re: Can cylinders be bored eccentric???
|
Jayem | Fri, 30 January 2004 12:37 |
|
Re: Can cylinders be bored eccentric???
|
allencr | Fri, 30 January 2004 14:31 |
|
Re: Can cylinders be bored eccentric???
|
clubagreenie | Sat, 31 January 2004 12:08 |
|
Re: Can cylinders be bored eccentric???
|
gold28 | Mon, 02 February 2004 02:18 |
