| Author | Topic |
|---|
Location:
Canberra
Registered:
April 2003
|
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
Sat, 31 January 2004 11:26
 
|
 |
Ok Ben I thought you already knew the options for the tranny to use, there is:
The SV21 camry box (pretty standard, may or may not last)
The MR2 Turbo box (stronger, it's all setup for a turbo, Very hard to find, if you do they cost..... alot, plus you need to get MR2 driveshafts and attach the GT4 outer CV's to the mr2 driveshafts, swap the linkages over from the GT4 box, and presto [probably cost more than your engine though])
The GT4 box (This is the option I am using, weld the visciuos couplings together and lock it in 2WD, box is very heavy compared to a FWD box, very experimental, and will cost alot to do this)
The V6 camry box (bellhousing won't fit, will need to get a broken MR2 turbo box and take the bellhousing off and bolt it onto the V6 box [note a stuffed MR2 box will still be rather expensive])
The 4AGZE box (same as the V6 camry box, need to do a bell housing swap, don't know what driveshafts you would need to use though)
These were the only options that I found viable when I looked into my 3SGTE swap.
Ben are you looking at doing this very soon, are you still going the gen3 engine?
|
|
|
| | Subject | Poster | Date |
|---|
 |
Suitable gearbox for 3SGTE conv. into ST162
|
benmeyer | Thu, 29 January 2004 06:35 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
toof | Thu, 29 January 2004 07:12 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
benmeyer | Thu, 29 January 2004 07:33 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
benmeyer | Fri, 30 January 2004 23:18 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
toof | Sat, 31 January 2004 01:48 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
justcallmefrank | Sat, 31 January 2004 01:07 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
Doctakay | Sat, 31 January 2004 01:22 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
wiso | Sat, 31 January 2004 11:26 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
Draza | Sat, 31 January 2004 12:14 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
benmeyer | Wed, 04 February 2004 13:17 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
wiso | Wed, 04 February 2004 13:27 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
ed_ma61 | Wed, 04 February 2004 13:23 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
ed_ma61 | Wed, 04 February 2004 13:31 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
justcallmefrank | Wed, 04 February 2004 23:56 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
jase | Thu, 05 February 2004 11:49 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
Draza | Thu, 05 February 2004 23:44 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
alwaysRA23 | Fri, 06 February 2004 03:18 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
jase | Sat, 07 February 2004 09:36 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
sxturbo | Sat, 07 February 2004 12:28 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
benmeyer | Mon, 29 March 2004 11:35 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
Disco Scoob | Mon, 29 March 2004 12:03 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
alwaysRA23 | Mon, 29 March 2004 13:21 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
Techie | Mon, 29 March 2004 14:53 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
benmeyer | Mon, 29 March 2004 23:44 |
|
Re: Suitable gearbox for 3SGTE conv. into ST162
|
Draza | Tue, 30 March 2004 07:09 |
