| Author | Topic |
|---|
Location:
1st street on the right
Registered:
November 2002
|
|
Re: Can cylinders be bored eccentric???
|
Sat, 31 January 2004 12:08
 
|
 |
The single most important thing is that the rod is aligned longitudinally over the crank as and offset (beyond allowable tollerance) WILL bend it. So allign the bores over the crank (along and across) then machine/fill the head to match the bores.
Original specs for Repco Brabham F1 engines was for <50thou offset any way for bore to crank. And this was when they used to be machined by hand not CNC'd. So someone should be able to do more than just a half assed job.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Can cylinders be bored eccentric???
|
Jayem | Thu, 29 January 2004 20:56 |
|
Re: Can cylinders be bored eccentric???
|
T APLUS 22 | Thu, 29 January 2004 21:13 |
|
Re: Can cylinders be bored eccentric???
|
Jayem | Thu, 29 January 2004 21:39 |
|
Re: Can cylinders be bored eccentric???
|
justcallmefrank | Thu, 29 January 2004 23:41 |
|
Re: Can cylinders be bored eccentric???
|
wagonist | Fri, 30 January 2004 01:15 |
|
Re: Can cylinders be bored eccentric???
|
Asher | Fri, 30 January 2004 04:06 |
|
Re: Can cylinders be bored eccentric???
|
purpleminiep | Fri, 30 January 2004 06:23 |
|
Re: Can cylinders be bored eccentric???
|
ed_ma61 | Fri, 30 January 2004 06:30 |
|
Re: Can cylinders be bored eccentric???
|
YelloRolla | Fri, 30 January 2004 07:07 |
|
Re: Can cylinders be bored eccentric???
|
clubagreenie | Fri, 30 January 2004 07:49 |
|
Re: Can cylinders be bored eccentric???
|
Scorpion | Fri, 30 January 2004 08:23 |
|
Re: Can cylinders be bored eccentric???
|
Jayem | Fri, 30 January 2004 09:54 |
|
Re: Can cylinders be bored eccentric???
|
Jayem | Fri, 30 January 2004 10:38 |
|
Re: Can cylinders be bored eccentric???
|
slydar | Fri, 30 January 2004 09:32 |
|
Re: Can cylinders be bored eccentric???
|
ed_ma61 | Fri, 30 January 2004 10:40 |
|
Re: Can cylinders be bored eccentric???
|
Jayem | Fri, 30 January 2004 10:50 |
|
Re: Can cylinders be bored eccentric???
|
gold28 | Fri, 30 January 2004 11:01 |
|
Re: Can cylinders be bored eccentric???
|
Jayem | Fri, 30 January 2004 12:06 |
|
Re: Can cylinders be bored eccentric???
|
mrshin | Fri, 30 January 2004 11:13 |
|
Re: Can cylinders be bored eccentric???
|
Bill Sherwood | Fri, 30 January 2004 12:15 |
|
Re: Can cylinders be bored eccentric???
|
Jayem | Fri, 30 January 2004 12:37 |
|
Re: Can cylinders be bored eccentric???
|
allencr | Fri, 30 January 2004 14:31 |
|
Re: Can cylinders be bored eccentric???
|
clubagreenie | Sat, 31 January 2004 12:08 |
|
Re: Can cylinders be bored eccentric???
|
gold28 | Mon, 02 February 2004 02:18 |
