Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Classifieds » Parts Wanted » pair of 304 cams

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
CelicaRA45
Forums Junkie


Location:
nth ringwood, Victoria
Registered:
August 2002
Re: pair of 304 cams Sun, 01 February 2004 09:34 Go to previous messageGo to previous message
i have none this guy for 25 years and his work is spot on the specs on the trd 304 are 10mm lift also you could use the 288 on the exhaust these profiles were trd rally spec ,is your engine 1600 or 1800 or bored out to 2000 also ,cause they were used on the 2tg and 18rg for rallys over lap with the 304 on exhaust could be aproblem depends on how deep you valve reliefs are the specs are 304 10mm lift 260 at 50 from memory 288 9.6mm lift about 250 at 50 i have the set up here some where 104% at atdc and 104 btdc
  Send a private message to this user    

SubjectPosterDate
Read Message   pair of 304 cams PheonixThu, 29 January 2004 09:35
Read Message   Re: pair of 304 cams CelicaRA45Sun, 01 February 2004 01:44
Read Message   Re: pair of 304 cams PheonixSun, 01 February 2004 03:31
Read Message   Re: pair of 304 cams  CelicaRA45Sun, 01 February 2004 09:34
Read Message   Re: pair of 304 cams ed_ma61Sun, 01 February 2004 05:01
Read Message   Re: pair of 304 cams PheonixTue, 03 February 2004 10:37
Read Message   Re: pair of 304 cams CelicaRA45Wed, 04 February 2004 05:27
Previous Topic:ae82 twin cam front hubs
Next Topic:TA22 rear Springs Upper insulator

Goto Forum:
-=] Back to Top [=-

Current Time: Tue Jul 29 03:44:40 UTC 2025

Total time taken to generate the page: 0.004004955291748 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.