| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
Re: vacumn and fuel lines for 1ggte
|
Mon, 02 February 2004 12:49
|
 |
maybe some of the articles here:
<http://www.autoshop101.com/autoshop15.html>
might be helpful?
easy way to sort out plumbing is process of elimination - connect up the obvious ones (brake booster, PCV, TVIS) first then look for the emissions hardware that looks most like yours and start hooking stuff up.
fuel is dead simple - fuel line comes up over starter motor to dampener at end of fuel rail, midway along cold start injector feeder bolts onto rail, at front end of rail regulator is attached and feeds back thru centre gap in manifold then back to the tank.
fwiw: the 1G that i got from helmann had a lot of the smaller ports on the intake manifold with caps on them.
|
|
|
