| Author | Topic |
|---|
Location:
NSW
Registered:
September 2003
|
|
Re: Nevo pulley install
|
Tue, 03 February 2004 02:03
 
|
 |
It takes about 5 minutes to undo the 3 nuts on the engine mounts on the drivers side. You don't even need to take the nuts right off the bolt.. just screw them to the end of the tread and the engine will drop about 2 inches. I just did an idler pulley adjustment in my AW11 on the weekend... 14mm soket and about 18inches of extension bars and it is a piece of piss! Crank pulley dunno... never been there... but i imagine you need some sort of puller tool!!! ie not your hand! 
|
|
|
| | Subject | Poster | Date |
|---|
 |
Nevo pulley install
|
old_mr2 | Mon, 02 February 2004 06:49 |
|
Re: Nevo pulley install
|
T APLUS 22 | Mon, 02 February 2004 08:43 |
|
Re: Nevo pulley install
|
old_mr2 | Tue, 03 February 2004 00:45 |
|
Re: Nevo pulley install
|
Ben Wilson | Tue, 03 February 2004 01:51 |
|
Re: Nevo pulley install
|
adamb131 | Tue, 03 February 2004 02:03 |
|
Re: Nevo pulley install
|
old_mr2 | Tue, 03 February 2004 06:49 |
|
Re: Nevo pulley install
|
Flogbag | Tue, 03 February 2004 10:50 |
|
Re: Nevo pulley install
|
[S.T.A.R.S] | Tue, 03 February 2004 11:10 |
|
Re: Nevo pulley install
|
mrshin | Tue, 03 February 2004 11:26 |
|
Re: Nevo pulley install
|
old_mr2 | Sun, 08 February 2004 14:57 |
|
Re: Nevo pulley install
|
Spanktown | Mon, 09 February 2004 02:20 |
