F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Some 1GGZE Tech Help! Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Grant Forums Junkie Location: Newcastle, NSW, Australia Registered: May 2002	Re: Some 1GGZE Tech Help! Thu, 15 August 2002 21:56 I've never heard of a HKS crank pulley for the 1GGZE. The 1GGZE was not considered a performance engine so there is very little in the way of 'go-fast' bits for them. From memory, I don't think you can swap the smaller 4AGZE blower pulley either as it has the wrong belt offset. Anything you do will most likely have to be custom made. As for oil, a good syntehtic engine oil like 5-50 is fine. Other oils like ATF or power steering fluid may be thinner (and better) but I'm not sure how they would effect the casing seal (o-ring). [Report message to a moderator]

	Subject	Poster	Date
	Some 1GGZE Tech Help!	gtv6gp	Wed, 14 August 2002 12:17
	Re: Some 1GGZE Tech Help!	gtv6gp	Thu, 15 August 2002 09:04
	Re: Some 1GGZE Tech Help!	ChuckLandwehr	Thu, 15 August 2002 10:57
	Re: Some 1GGZE Tech Help!	gtv6gp	Thu, 15 August 2002 16:26
	Re: Some 1GGZE Tech Help!	E30-323ti	Thu, 15 August 2002 20:33
	Re: Some 1GGZE Tech Help!	Grant	Thu, 15 August 2002 21:56
	Re: Some 1GGZE Tech Help!	Jonoze	Thu, 15 August 2002 23:55
	Re: Some 1GGZE Tech Help!	Grant	Fri, 16 August 2002 00:32
	Re: Some 1GGZE Tech Help!	gtv6gp	Fri, 16 August 2002 08:51
	Re: Some 1GGZE Tech Help!	Grant	Mon, 19 August 2002 21:41
	Re: Some 1GGZE Tech Help!	Jonoze	Mon, 19 August 2002 22:46
	Re: Some 1GGZE Tech Help!	gtv6gp	Sun, 25 August 2002 07:01

Previous Topic:	what goes around comes around/gearbox
Next Topic:	RA65 Ute?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.